El Viernes, 22 de Septiembre de 2006 08:58, Patrick Boettcher escribió: > Hi, > > Mario, can you please try the attached patch and see, if this fixes your > problem ? > With this patch AverTV DVB-T USB 2.0 still don't work. Jose Alberto > Thanks Jose for finding it. I knew I would forget this thing when changing > the set_pwm-function... > > Sorry, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > On Thu, 21 Sep 2006, Jose Alberto Reguero wrote: > > El Miércoles, 20 de Septiembre de 2006 22:56, Mario Rossi escribió: > > > I've tried with the new patches > > > > > > 1) module loading works fine now > > > 2) I cannot tune or scan anything > > > 3) make unload works fine > > > > Also AverTV DVB-T USB 2.0 don't work. > > Looking at the code I thing that this changset: > > > > http://linuxtv.org/hg/v4l-dvb?cmd=changeset;node=51f233c864c5;style=gitwe > >b > > > > breaks dib3000mc devices especialy this part: > > > > @@ -167,15 +150,18 @@ static int dib3000mc_set_timing(struct d > > return 0; > > } > > -static int dib3000mc_setup_pwm3_state(struct dib3000mc_state *state) > > -{ > > +static int dib3000mc_setup_pwm_state(struct dib3000mc_state *state) > > +{ > > + u16 reg_51, reg_52 = state->cfg->agc->setup & 0xfefb; > > if (state->cfg->pwm3_inversion) { > > - dib3000mc_write_word(state, 51, (2 << 14) | (0 << 10) | (7 << 6) | (2 > > << 2) | (2 << 0)); > > - dib3000mc_write_word(state, 52, (0 << 8) | (5 << 5) | (1 << 4) | (1 << > > 3) | (1 << 2) | (2 << 0)); > > + reg_51 = (2 << 14) | (0 << 10) | (7 << 6) | (2 << 2) | (2 << 0); > > + reg_52 |= (1 << 2); > > } else { > > - dib3000mc_write_word(state, 51, (2 << 14) | (4 << 10) | (7 << 6) | (2 > > << 2) | (2 << 0)); > > - dib3000mc_write_word(state, 52, (1 << 8) | (5 << 5) | (1 << 4) | (1 << > > 3) | (0 << 2) | (2 << 0)); > > - } > > + reg_51 = (2 << 14) | (4 << 10) | (7 << 6) | (2 << 2) | (2 << 0); > > + reg_52 |= (1 << 8); > > + } > > + dib3000mc_write_word(state, 51, reg_51); > > + dib3000mc_write_word(state, 52, reg_52); > > if (state->cfg->use_pwm3) > > dib3000mc_write_word(state, 245, (1 << 3) | (1 << 0)); > > > > This change the values for reg_52 which are good for NOVA T 500 but are > > not good for other devices. > > > > Jose Alberto > > > > > > _______________________________________________ > > linux-dvb mailing list > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
