Hi, After todays changes in the Dib3000 code my Hauppauge Win TV NOVA T USB2 is not working any more. I'm using Fedora Core 5, kernel from source 2.6.17.13 and latest mercurial. This is the output Sep 19 19:06:47 thinkpad kernel: usb 4-4: new high speed USB device using ehci_hcd and address 3 Sep 19 19:06:47 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice Sep 19 19:06:47 thinkpad kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware Sep 19 19:06:47 thinkpad kernel: dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-02.fw' Sep 19 19:06:47 thinkpad kernel: usbcore: registered new driver dvb_usb_nova_t_usb2 Sep 19 19:06:48 thinkpad kernel: usb 4-4: USB disconnect, address 3 Sep 19 19:06:48 thinkpad kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Sep 19 19:06:49 thinkpad kernel: usb 4-4: new high speed USB device using ehci_hcd and address 4 Sep 19 19:06:50 thinkpad kernel: usb 4-4: configuration #1 chosen from 1 choice Sep 19 19:06:50 thinkpad kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state. Sep 19 19:06:50 thinkpad kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Sep 19 19:06:50 thinkpad kernel: DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2). Sep 19 19:06:50 thinkpad kernel: dvb-usb: MAC address: 00:0d:fe:04:8b:40 Sep 19 19:06:50 thinkpad kernel: dvb-usb: no frontend was attached by 'Hauppauge WinTV-NOVA-T usb2' Sep 19 19:06:50 thinkpad kernel: input: IR-receiver inside an USB DVB receiver as /class/input/input4 Sep 19 19:06:50 thinkpad kernel: dvb-usb: schedule remote query interval to 100 msecs. Sep 19 19:06:50 thinkpad kernel: dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. As you can read the problem is the fronted which is not attached, and in fact no frontend is present under /dev/dvb/adapter0 crw------- 1 andrea root 212, 4 Sep 19 19:06 demux0 crw------- 1 andrea root 212, 5 Sep 19 19:06 dvr0 crw------- 1 andrea root 212, 7 Sep 19 19:06 net0 scan returns this error [andrea@thinkpad ~]$ scan /opt/dvb/uk-CrystalPalace scanning /opt/dvb/uk-CrystalPalace using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2251: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory Is there some new options I'm supposed to pass to the module? Those are the (relevant) loaded modules dvb_usb_nova_t_usb2 6020 0 dvb_usb_dibusb_common 9604 1 dvb_usb_nova_t_usb2 dib3000mc 11780 2 dvb_usb_dibusb_common dibx000_common 3844 1 dib3000mc dvb_usb 21900 2 dvb_usb_nova_t_usb2,dvb_usb_dibusb_common dvb_core 69800 1 dvb_usb dvb_pll 14212 2 dvb_usb_dibusb_common,dvb_usb radeon 98848 1 drm 61076 2 radeon i2c_dev 8324 0 i2c_core 19472 5 dib3000mc,dibx000_common,dvb_usb,dvb_pll,i2c_dev any ideas? _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
