Hauppauge Nova-T usb installation problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello all,

i do not get my Hauppauge WinTV Nova-T usb stick to work under debian linux. I sucessfully put in the modules 

- dib3000-common.ko
- dib3000mc.ko
- dvb-usb.ko
- dvb-usb-dibusb-common.ko
- dvb-usb-nova-t-usb2.ko

as it is discribed here: http://linuxtv.org/wiki/index.php/DVB_USB#Hauppauge_WinTV-NOVA-T_usb2

and I put the firmware dvb-usb-dibusb-6.0.0.8.fw from http://www.linuxtv.org/downloads/firmware/ to my /usr/lib/hotplug/firmware/ directory and put a link named dvb-usb-nova-t-usb2-01.fw in the same directory pointing on it.

Unfortunaly nothing happens. Not even the control led on the stick does anything. The /dev directory stays as it was before. 
No new device /dev/dvb/adapter0/ - nothing.

The Kernel I use, is the 2.6.15-1-k7 taken with apt-get.

lsusb says:
Bus 005 Device 002: ID 2040:7050 Hauppauge
dmesg says:
usbcore: registered new driver dvb_usb_nova_t_usb2

What do I wrong? Does anyone have an idea?
Thanks, Peter.

-- 


Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux