Hi, Is the remote control supported with Avermedia 777 / SAA7134 ? The device is working really well using latest v4l mercurial sources, this is the dmesg output from modprobe saa7134_dvb: saa7130/34: v4l2 driver version 0.2.14 loaded ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18 saa7134[0]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 32, mmio: 0xf9101000 saa7134[0]: subsystem: 1461:2c05, board: AverTV DVB-T 777 [card=85,autodetected] saa7134[0]: board init: gpio is 2f800 saa7134[0]: i2c eeprom 00: 61 14 05 2c 00 00 00 00 00 00 00 00 00 00 00 00 saa7134[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a8 ff ff ff ff saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7134[0]: registered device video0 [v4l2] saa7134[0]: registered device vbi0 saa7134[0]: avertv 777 dvb setup DVB: registering new adapter (saa7134[0]). DVB: registering frontend 0 (Zarlink MT352 DVB-T)... Any suggestions? Ive tried modprobe saa7134 ir_debug=1 but it didnt appear to have much effect. I have another card (Technotrend S1500+CI) for which I load budget_ci module, with that card I can see the ir device being created: input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input4 But the remote for this card has few buttons and I would like to try the one that came with the Avermedia 777. Thanks Andy _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
