First of all, my Freecom DVB-T stick is working. Thanks to all who posted information (Erich, Brett, Alexander........) I updated to SUSE 10.1 did what Brett wrote for me in the thread " DViCO FusionHDTV DVB-T Plus on Suse 10.1", downloaded the latest v4l-dvb, (the patch for 14aa:0225 had been added) installed, and it`s working using KLEAR. Kaffeine isn`t working quite as expected. Some information for Benjiie: I called dmesg and saw that my device had also been loaded twice, but it still worked. d/vb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in warm state. PCI: Setting latency timer of device 0000:00:1f.5 to 64 dvb-usb: will use the device's hardware PID filter (table count: 15). DVB: registering new adapter (WideView WT-220U PenType Receiver (Typhoon/Freecom)). DVB: registering frontend 0 (WideView USB DVB-T)... input: IR-receiver inside an USB DVB receiver as /class/input/input3 dvb-usb: schedule remote query interval to 300 msecs. dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected. dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in warm state. dvb-usb: will use the device's hardware PID filter (table count: 15). DVB: registering new adapter (WideView WT-220U PenType Receiver (Typhoon/Freecom)). DVB: registering frontend 1 (WideView USB DVB-T)... input: IR-receiver inside an USB DVB receiver as /class/input/input4 dvb-usb: schedule remote query interval to 300 msecs. dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected. Benjiie wrote//: /I have another (older, art. no.: 25452) Freecom stick which works perfectly. Don`t you have the Channels Config file form the older device? I had been using a Hauppauge DEC-T 2000, and my Freecom stick is using the same channels list. I didn`t scan again. / Starting up Klear version 0.5.4 Current configuration-version: 16 Needed configuration-version: 16 Klear config loaded EIT vector set up Playback Engine added to GUI Starting exception protected startup Window resized to last value Loading channels list Channelsconf is:/home/ed/.klear//channels.conf ControllerMain: Channels list found. Reading in.... Channellist loaded AudioPid: 226 VideoPid: 225 Demux: demux0 / Good luck Eddie _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
