Hi, Trying to make Twinhan VisionPlus working I have some issues with missing symbols: # cd cgi-bin-hgwebdir-cgi-v4l-algo-test-70266933831b # make <snip> WARNING: Symbol version dump /usr/src/linux-2.6.14-epios-r501/Module. symvers is missing; modules will have no dependencies and modversions. <snip> # make install <snip> # modprobe dvb-bt8xx WARNING: Error inserting bttv (/lib/modules/2.6.14-epios-r501/kernel/ drivers/media/video/bt8xx/bttv.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting bt878 (/lib/modules/2.6.14-epios-r501/kernel/ drivers/media/dvb/bt8xx/bt878.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting dst (/lib/modules/2.6.14-epios-r501/kernel/ drivers/media/dvb/bt8xx/dst.ko): Unknown symbol in module, or unknown parameter (see dmesg) WARNING: Error inserting dst_ca (/lib/modules/2.6.14-epios-r501/kernel/ drivers/media/dvb/bt8xx/dst_ca.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error inserting dvb_bt8xx (/lib/modules/2.6.14-epios-r501/ kernel/drivers/media/dvb/bt8xx/dvb-bt8xx.ko): Unknown symbol in module, or unknown parameter (see dmesg) # dmesg bttv: Unknown symbol ir_codes_avermedia bttv: Unknown symbol ir_codes_apac_viewcomp bttv: Unknown symbol ir_codes_avermedia_dvbt bttv: Unknown symbol v4l_printk_ioctl bttv: Unknown symbol videobuf_dma_unmap bttv: Unknown symbol videobuf_dma_sync bttv: Unknown symbol ir_codes_nebula bt878: Unknown symbol bttv_read_gpio bt878: Unknown symbol bttv_write_gpio bt878: Unknown symbol bttv_gpio_enable dst: Unknown symbol bt878_device_control dst_ca: Unknown symbol write_dst dst_ca: Unknown symbol dst_pio_disable dst_ca: Unknown symbol dst_comm_init dst_ca: Unknown symbol read_dst dst_ca: Unknown symbol dst_check_sum dst_ca: Unknown symbol dst_error_bailout dst_ca: Unknown symbol dst_wait_dst_ready dst_ca: Unknown symbol rdc_reset_state dst_ca: Unknown symbol dst_error_recovery dvb_bt8xx: Unknown symbol bt878_num dvb_bt8xx: Unknown symbol bttv_sub_unregister dvb_bt8xx: Unknown symbol dst_attach dvb_bt8xx: Unknown symbol bttv_write_gpio dvb_bt8xx: Unknown symbol bttv_sub_register dvb_bt8xx: Unknown symbol bttv_get_pcidev dvb_bt8xx: Unknown symbol dst_ca_attach dvb_bt8xx: Unknown symbol bt878_start dvb_bt8xx: Unknown symbol bttv_gpio_enable dvb_bt8xx: Unknown symbol bt878_stop dvb_bt8xx: Unknown symbol bt878 If I modprobe "semi-manually" everythings seems to be fine: # modprobe bttv # modprobe bt878 # modprobe dst # modprobe dst-ca # modprobe dvb-bt8xx # uname -a Linux 2.6.14-epios-r501 #1 SMP PREEMPT Wed Dec 28 02:32:37 CET 2005 i686 VIA Nehemiah CentaurHauls GNU/Linux Thanks. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb