Erich Focht schrieb: > Hi Ed, > > what distro are you using? > Suse 10.0 > You should only try one v4l-dvb release, the latest one. For that look at > http://linuxtv.org/wiki/index.php/How_to_install_DVb > You'll need to download mercurial as tarball, build it as described in > INSTALL. Take care to have python-devel installed. > I had downloaded latest release. python-devel is not installed, I`ll install it. > After checking out v4l-dvb (hg pull ...) make sure that you have the kernel > sources installed and configured. Under RedHat/Fedora this is some > kernel-*-devel package. Under SuSe it's kernel-source. You MUST have > /lib/modules/`uname -r`/build/* around. > > I had bad experience with SuSE 10.0 when trying to build v4l-dvb. Some drivers > are too new and not able to build with older kernels any more. If the build > fails for some driver (which you don't need), a dirty workaround is to comment > out the corresponding CONFIG_... line in the > /lib/modules/`uname -r`/build/.config file. > > Good luck, > regards, > Erich > > Thsanks Eddie _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
