Re: DViCO FusionHDTV DVB-T Dual [[SOLVED]]

[Dean Macauley <dean.macauley@xxxxxxxxxxxxx>]

I now have two adapters under /dev/dvb (adapter0 and adapter1)...

The solution was to download the latest v4l-dvb, compile and install.  It seems my problem is that I have a newer version of the DViCO FusionHDTV DVB-T Dual Digital card which requires a patch made for the PCI tuner on the card that was made fairly recently.

dmesg (PCI part):

Linux video capture interface: v2.00
cx2388x dvb driver version 0.0.6 loaded
CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:05:06.2[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58
cx88[0]/2: found at 0000:05:06.2, rev: 5, irq: 58, latency: 32, mmio: 0xd4000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...

dmesg (USB part):

dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)...
input: IR-receiver inside an USB DVB receiver as /class/input/input4
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.

And the output of lsmod:

Module                  Size  Used by
dvb_usb_cxusb          24580  0
dvb_usb                20616  1 dvb_usb_cxusb
cx88_dvb               14340  0
cx8802                 12100  1 cx88_dvb
cx88xx                 60004  2 cx88_dvb,cx8802
ir_common              27524  1 cx88xx
btcx_risc               6024  2 cx8802,cx88xx
tveeprom               16720  1 cx88xx
videodev               24064  1 cx88xx
v4l1_compat            12612  1 videodev
v4l2_common            24000  1 videodev
cx88_vp3054_i2c         6336  1 cx88_dvb
i2c_algo_bit           10184  2 cx88xx,cx88_vp3054_i2c
mt352                   8324  2 dvb_usb_cxusb,cx88_dvb
dvb_pll                14724  3 dvb_usb_cxusb,dvb_usb,cx88_dvb
or51132                11076  1 cx88_dvb
video_buf_dvb           6724  1 cx88_dvb
dvb_core               75504  2 dvb_usb,video_buf_dvb
video_buf              22404  4 cx88_dvb,cx8802,cx88xx,video_buf_dvb
nxt200x                14788  1 cx88_dvb
isl6421                 4032  1 cx88_dvb
zl10353                 6916  2 dvb_usb_cxusb,cx88_dvb
cx24123                13704  1 cx88_dvb
lgdt330x                9948  2 dvb_usb_cxusb,cx88_dvb
cx22702                 7748  2 dvb_usb_cxusb,cx88_dvb

I have not actually seen TV on both tuners yet as I am continuing to install MythTV...

Thanks for your responses.

cheers

Dean.

Dean Macauley wrote:

Hi,

I have purchased this card, and I have been struggling to get things working with gentoo (kernel 2.6.16).  I am fairly new to playing with linux at this level but I have been learning much thank you to many posts etc...

I have a question regarding this card and what I should expect in terms devices...

Should I see two adapters under /dev/dvb/ ?  At the moment, things seem okay in dmesg (see below) however, I only have one adapter in /dev/dvb/.  The other is /dev/vbi0 ...

I have discovered that one tuner is PCI while the other is USB...

I am loading the following modules:

Module                  Size  Used by
dvb_usb_cxusb          23684  0
mt352                   8196  1 dvb_usb_cxusb
lgdt330x                9692  1 dvb_usb_cxusb
cx22702                 8068  1 dvb_usb_cxusb
dvb_usb                18248  1 dvb_usb_cxusb
dvb_core               77148  1 dvb_usb
dvb_pll                12356  3 dvb_usb_cxusb,cx22702,dvb_usb
cx8800                 30412  0
cx88xx                 62500  1 cx8800
i2c_algo_bit           10184  1 cx88xx
video_buf              20164  2 cx8800,cx88xx
ir_common              10756  1 cx88xx
tveeprom               17040  1 cx88xx
compat_ioctl32          9856  1 cx8800
v4l1_compat            12804  1 cx8800
v4l2_common            10304  2 cx8800,compat_ioctl32
btcx_risc               6216  2 cx8800,cx88xx
videodev               10880  2 cx8800,cx88xx

when I try to modprobe cx88-dvb, I get an error that initialisation failed, while modprobe cx8800 seems to work...  Have I got it right?  Or should I expect two adapters in /dev/dvb?

Thanks in advance!

Dean.

P.S.  dmesg output below

CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:05:06.0, rev: 5, irq: 58, latency: 32, mmio: 0xd3000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
set_control id=0x980900 reg=0x310110 val=0x00 (mask 0xff)
set_control id=0x980901 reg=0x310110 val=0x3f00 (mask 0xff00)
set_control id=0x980903 reg=0x310118 val=0x00 (mask 0xff)
set_control id=0x980902 reg=0x310114 val=0x5a7f (mask 0xffff)
set_control id=0x980909 reg=0x320594 val=0x40 (mask 0x40) [shadowed]
set_control id=0x980905 reg=0x320594 val=0x20 (mask 0x3f) [shadowed]
set_control id=0x980906 reg=0x320598 val=0x40 (mask 0x7f) [shadowed]
dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB).
dvb-usb: recv bulk message failed: -110
dvb-usb: no frontend was attached by 'DViCO FusionHDTV DVB-T Dual USB'
input: IR-receiver inside an USB DVB receiver as /class/input/input4
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected.

-- 
Dean Macauley
Team Leader - Datalink Detection Function (DDF)
THALES Air Traffic Management
Phone:  +61 (0)3 9425 7533   Mobile: +61 (0)416 084 591
  

_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

-- 
Dean Macauley
Team Leader - Datalink Detection Function (DDF)
THALES Air Traffic Management
Phone:  +61 (0)3 9425 7533   Mobile: +61 (0)416 084 591

_______________________________________________

linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb