I have this Card with Ubuntu 2.6.15-25-amd64 + latest v4l. I can tzap -a 0 or tzap -a 1 both fine and get lock, but I only the first works (I never get get data from /dev/dvb/adapter1/dvr0...) I used VLC (once I have tunned) or Kaffine (nice...) On Thu, 2006-06-29 at 10:41 +1000, Dean Macauley wrote: > Hi, Gday! > I have purchased this card, and I have been struggling to get things > working with gentoo (kernel 2.6.16). I am fairly new to playing with > linux at this level but I have been learning much thank you to many > posts etc... > > I have a question regarding this card and what I should expect in > terms devices... > > Should I see two adapters under /dev/dvb/ ? At the moment, things > seem okay in dmesg (see below) however, I only have one adapter > in /dev/dvb/. The other is /dev/vbi0 ... I get two adapters under /dev/dvb/adapter0 and /dev/dvb/adapter1 (also a /dev/vbi0 ?? -- perhaps this is for the analog input on the card??) > I have discovered that one tuner is PCI while the other is USB... Wacky isn't it? > I am loading the following modules: > > Module Size Used by > dvb_usb_cxusb 23684 0 > mt352 8196 1 dvb_usb_cxusb > lgdt330x 9692 1 dvb_usb_cxusb > cx22702 8068 1 dvb_usb_cxusb > dvb_usb 18248 1 dvb_usb_cxusb > dvb_core 77148 1 dvb_usb > dvb_pll 12356 3 dvb_usb_cxusb,cx22702,dvb_usb > cx8800 30412 0 > cx88xx 62500 1 cx8800 > i2c_algo_bit 10184 1 cx88xx > video_buf 20164 2 cx8800,cx88xx > ir_common 10756 1 cx88xx > tveeprom 17040 1 cx88xx > compat_ioctl32 9856 1 cx8800 > v4l1_compat 12804 1 cx8800 > v4l2_common 10304 2 cx8800,compat_ioctl32 > btcx_risc 6216 2 cx8800,cx88xx > videodev 10880 2 cx8800,cx88xx > pjchilds@pjcub:~/dvb$ lsmod | grep cx cx88_blackbird 21508 0 cx2341x 13444 1 cx88_blackbird cx88_dvb 17028 0 cx8802 15236 2 cx88_blackbird,cx88_dvb cx88_vp3054_i2c 6400 1 cx88_dvb dvb_usb_cxusb 26244 0 dvb_usb 25608 1 dvb_usb_cxusb cx8800 41356 2 cx88_blackbird cx88xx 69412 4 cx88_blackbird,cx88_dvb,cx8802,cx8800 or51132 11908 1 cx88_dvb video_buf_dvb 8324 1 cx88_dvb nxt200x 15492 1 cx88_dvb isl6421 3712 1 cx88_dvb mt352 8836 2 cx88_dvb,dvb_usb_cxusb dvb_pll 17412 3 cx88_dvb,dvb_usb_cxusb,dvb_usb zl10353 7300 2 cx88_dvb,dvb_usb_cxusb cx24123 14728 1 cx88_dvb ir_common 31620 1 cx88xx lgdt330x 10268 2 cx88_dvb,dvb_usb_cxusb cx22702 8196 2 cx88_dvb,dvb_usb_cxusb i2c_algo_bit 11144 2 cx88_vp3054_i2c,cx88xx video_buf 29828 6 cx88_blackbird,cx88_dvb,cx8802,cx8800,cx88xx,video_buf_dvb tveeprom 18832 1 cx88xx compat_ioctl32 10880 1 cx8800 btcx_risc 6536 3 cx8802,cx8800,cx88xx videodev 28416 4 cx88_blackbird,cx8800,cx88xx i2c_core 26624 21 i2c_acpi_ec,it87,eeprom,i2c_isa,cx88_dvb,dvb_usb_cxusb,dvb_usb,cx88xx,or51132,nxt200x,isl6421,mt352,dvb_pll,zl10353,cx24123,lgdt330x,cx22702,nvidia,i2c_algo_bit,tveeprom,i2c_nforce2 v4l1_compat 14468 2 cx8800,videodev v4l2_common 27392 5 cx88_blackbird,cx2341x,cx8800,compat_ioctl32,videodev usbcore 147004 7 dvb_usb_cxusb,dvb_usb,hci_usb,usbhid,ehci_hcd,ohci_hcd > when I try to modprobe cx88-dvb, I get an error that initialisation > failed, while modprobe cx8800 seems to work... Have I got it right? > Or should I expect two adapters in /dev/dvb? It shouldn't fail.... I had some problems and I got the latest v4l from the site and installed it. I still have problems, but at least one is working... My dmsg. [ 0.000000] Bootdata ok (command line is root=/dev/mapper/vgmirror-root ro quiet splash notsc) [ 0.000000] Linux version 2.6.15-25-amd64-generic (buildd@king) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Wed Jun 14 11:28:03 UTC 2006 [ ... ] [ 42.099249] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 42.543067] usb 2-4.4: new full speed USB device using ehci_hcd and address 5 [...] [ 46.345847] usbcore: registered new driver hiddev [ 46.372208] Linux video capture interface: v2.00 [ 46.373139] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 46.373171] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 46.402089] input: Microsoft Basic Optical Mouse as /class/input/input1 [ 46.402140] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-2 [ 46.402154] usbcore: registered new driver usbhid [ 46.402157] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [...] [ 47.129843] input: PC Speaker as /class/input/input2 [ 47.218040] cx2388x v4l2 driver version 0.0.6 loaded [ 47.218082] ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74 [ 47.218121] CORE cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,insmod option] [ 47.218125] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe [ 47.286819] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 47.286825] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225 [ 47.286991] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 47.293826] parport: PnPBIOS parport detected. [ 47.293876] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 47.306015] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in cold state, will try to load a firmware [ 47.352908] cx2388x dvb driver version 0.0.6 loaded [ 47.363494] dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw' [ 47.435019] usbcore: registered new driver dvb_usb_cxusb [ 47.439185] cx88[0]/0: found at 0000:05:08.0, rev: 5, irq: 74, latency: 32, mmio: 0xd0000000 [ 47.439223] cx88[0]/0: registered device video0 [v4l2] [ 47.439239] cx88[0]/0: registered device vbi0 [ 47.612096] intel8x0_measure_ac97_clock: measured 58716 usecs [ 47.612100] intel8x0: clocking to 46973 [ 47.613770] ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74 [ 47.613780] cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 74, latency: 32, mmio: 0xd1000000 [ 47.613787] cx88[0]/2: cx2388x based dvb card [ 47.618707] DVB: registering new adapter (cx88[0]). [ 47.618713] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... [ 47.640318] cx2388x blackbird driver version 0.0.6 loaded [ 47.679025] usb 2-6: USB disconnect, address 4 [ 47.679064] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [...] [ 49.429693] usb 2-6: new high speed USB device using ehci_hcd and address 6 [ 49.563198] dvb-usb: found a 'DViCO FusionHDTV DVB-T Dual USB' in warm state. [ 49.563209] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 49.574434] DVB: registering new adapter (DViCO FusionHDTV DVB-T Dual USB). [ 49.574640] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips [ 49.577659] DVB: registering frontend 1 (Zarlink ZL10353 DVB-T)... [ 49.577707] input: IR-receiver inside an USB DVB receiver as /class/input/input3 [ 49.577723] dvb-usb: schedule remote query interval to 150 msecs. [ 49.577726] dvb-usb: DViCO FusionHDTV DVB-T Dual USB successfully initialized and connected. [...] _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
