hello hartmut i don't understand very well, cause my english is poor :(( this is the correct channel.conf for paris ( xine and mplayer): TF1:562167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:1537 France2:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:120:130:257 France3:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:220:230:273 Canal+:522167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:160:80:769 France5:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:320:330:260 M6:498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:1025 ARTE:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:520:530:261 Direct8:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:160:80:513 W9:498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:220:230:1026 TMC:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:161:84:514 NT1:498167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:320:330:1027 NRJ12:562167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:220:230:1538 LCP:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:620:630:262 France4:586167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_3_4:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:420:430:259 I>TV:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:516 BFMTV:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:515 EUROPE2:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:517 GULLI:474167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:120:130:518 and the correct fr-Paris is ( xine and mplayer): # Paris - France (DVB-T transmitter of the Eiffel tower) # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 474167000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 498167000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 522167000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 562167000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 586167000 8MHz 3/4 NONE QAM64 8k 1/8 NONE however i have an another usb dvb-t card with a firmware dvb-usb-dtt200u-01.fw and any problem without to change my fr-Paris like this: # Paris - France (DVB-T transmitter of the Eiffel tower) # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 474000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 498000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 522000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 562000000 8MHz 2/3 NONE QAM64 8k 1/32 NONE T 586000000 8MHz 3/4 NONE QAM64 8k 1/8 NONE i have an another problem my fm-radio don't want to work witht gnomeradio or gradio:(( this is a part of my dmesg:2.6.15-25-k7 ( 25-43) ubuntu 6.06 [17179588.984000] saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [c ard=78,autodetected] [17179588.984000] saa7133[0]: board init: gpio is 40000 [17179588.984000] **** SET: Misaligned resource pointer: f7528e42 Type 07 Len 0 [17179588.984000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [17179588.984000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 ( level, high) -> IRQ 209 [17179588.984000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon Ma y 15 13:06:38 PDT 2006 [17179589.196000] eth1: link up. [17179589.212000] saa7133[0]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [17179589.212000] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179589.212000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [17179589.336000] tuner 2-004b: chip found @ 0x96 (saa7133[0]) [17179589.336000] tuner-core.c: no tuner extensions loaded! [17179589.336000] tuner-core.c: no tuner extensions loaded! [17179589.384000] tuner 2-004b: setting tuner address to 61 [17179589.424000] tuner 2-004b: type set to tda8290+75a [17179589.488000] saa7133[0]: registered device video1 [v4l2] [17179589.488000] saa7133[0]: registered device vbi0 [17179589.488000] saa7133[0]: registered device radio0 [17179589.500000] saa7134 ALSA driver for DMA sound loaded [17179589.500000] saa7133[0]/alsa: saa7133[0] at 0xe8000000 irq 201 registered a s card -1 tv analog doesn't work too :d:d: with tvtime and xawtv my /etc/modules: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp psmouse sbp2 sr_mod saa7134_dvb saa7134 bye and thank's hartmut (bertrand si tu as des problèmes pour configurer ta carte, envoies moi un message) ----- Message d'origine ---- De : Hartmut Hackmann <hartmut.hackmann@xxxxxxxxxxx> À : Linux and Kernel Video <video4linux-list@xxxxxxxxxx> Cc : linux-dvb@xxxxxxxxxxx; franck desbois <franckdesbois@xxxxxxxx> Envoyé le : Mardi, 20 Juin 2006, 10h38mn 29s Objet : Re: Re : Re : ASUS P7131 DUAL DVB-T enable dvb-t asus p7131 dual + fm saa7134 Hi, Bertand Bertrand Baudet wrote: > On Monday 19 June 2006 23:26, hermann pitton wrote: > >>Am Montag, den 19.06.2006, 12:59 +0000 schrieb franck desbois: >> >>>hello >>> >>>i's for your information : 2.6.15-25-k7 ( 2.6.15-25-43) on ubuntu dapper >>>6.06 >>> >>>i want you notify when i install my asus p7131 on another hard disk on >>>the same computer if i use the mercurial snapshot of linuxtv v4l-dvb ( >>>hg clone http://linuxtv.org/hg/v4l-dvb) my card doesn't work, i have got >>>many error messages, but when i use this snapshot (hg clone >>>http://linuxtv.org/hg/~mrechberger/v4l-dvb) it works. >>> >>>final world of cup : france vs deutschland ? >>> >>>franck >> >>Hi! >> >>Seems some are still against it ;) >>But the cards should do. >> >>Just tried the current mercurial master repository and find no problems. >>Maybe you had some of the older modules still loaded? >>(analog not yet tested) >> >>I'll try to send to the video4linux-list too. Bertrand is trying on >>almost the same card, also in Paris. He has the analog part working, >>but some trouble with DVB-T and maybe mplayer timeouts. He added a >>positive offset of 165KHz to the channels and dvbscan and channels.conf >>seems OK. If it is not working already now, maybe you can help each >>other. > > > Hartmut was right, it works for some channels with Xine. > Mlayer can get anyone. > I will try with tzap and see if I can get all the channels but > it looks like the short timeout for the tuning was the issue. > Oh, good to know! May i ask you to investigate this further and then post a "fixed" channnels.conf file? You are not the only one who has these problems ;-) The big question is how to continue with this: I could fix this in the channel decoder driver - either with a quite dirty fix which has disadvantages - or with a clean solution which requires to put the driver into a kernel thread. This is a significant amount of work. I still think the best solution is to handle this with a scanning utility. We might extend and polish the w_scan utility for this. Hartmut _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
