Changing IDs, as Eduardo Bellido suggested in his mail, makes the device to be detected, but firmware cannot be loaded: Jun 18 00:38:47 gimli kernel: dvb-usb: downloading firmware from file 'dvb-usb-avertv-a800-02.fw' Jun 18 00:38:47 gimli kernel: dvb-usb: could not stop the USB controller CPU. Jun 18 00:38:47 gimli kernel: dvb-usb: error while transferring firmware (transferred size: -32, block size: 16) Jun 18 00:38:47 gimli kernel: dvb-usb: firmware download failed at 21 with -22 Jun 18 00:38:47 gimli kernel: dvb_usb_a800: probe of 4-3:1.0 failed with error -22 It seems that a new firmware is also needed to make this stick work. The changes I have made are not compatible with normal a800 driver work, as I have changed defaut IDs. The diff is: diff -r 433c7cc16c79 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sat Jun 17 08:52:30 2006 -0300 +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sun Jun 18 01:08:19 2006 +0200 @@ -38,8 +38,8 @@ #define USB_PID_ADSTECH_USB2_WARM 0xa334 #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 -#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 -#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xb808 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xb809 #define USB_PID_COMPRO_DVBU2000_COLD 0xd000 #define USB_PID_COMPRO_DVBU2000_WARM 0xd001 #define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c Thanks -- Jose Carlos Garcia Sogo jsogo@xxxxxxxxxx _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
