Hi,
I am trying to make AverMedia USB DVB-T Volar tuner[0] work without any
success, though Avermedia claims it should work with dibusb driver[1]. I
am using Debian Sid (unstable) with 2.6.16 kernel.
I have followed Patrick Boettcher webpage, having downloaded an hg copy
of v4l-dvb and compiled modules. I have installed them and I have run
"modprobe dvb-usb-dibusb-mc dvb-usb-a800". Of course, I have also
installed firmware (everyone, so this cannot be the problem)
in /usr/lib/hotplug/firmware
When I plug the device in a USB port I don't get anything very useful,
but udev output, and nothing from modules themselves. The syslog output
is attached.
Any help would be welcomed, as I don't have any clue about what
direction should I follow to make this work.
Thanks
[0]
http://www.averm.co.uk/avermedia/aver/products_digitvtuner_dvbtvolar.asp?show=1
[1] http://www.avermedia.com/docs/pdffiles/A808-README.txt
--
Jose Carlos Garcia Sogo
jsogo@xxxxxxxxxx
Jun 17 22:38:41 gimli kernel: usb 4-3: new high speed USB device using ehci_hcd and address 13
Jun 17 22:38:41 gimli udevd[927]: udev_event_run: seq 2118 forked, pid [8926], 'add' 'usb', 0 seconds old
Jun 17 22:38:41 gimli kernel: usb 4-3: configuration #1 chosen from 1 choice
Jun 17 22:38:41 gimli udevd-event[8926]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-3/bus' appeared after 0 loops
Jun 17 22:38:41 gimli udevd-event[8926]: pass_env_to_socket: passed 191 bytes to socket '/org/freedesktop/hal/udev_event',
Jun 17 22:38:41 gimli udevd-event[8926]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Jun 17 22:38:41 gimli udevd-event[8926]: run_program: 'udev_run_hotplugd usb'
Jun 17 22:38:41 gimli udevd-event[8926]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8926]: run_program: 'udev_run_devd usb'
Jun 17 22:38:41 gimli udevd-event[8926]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8926]: udev_event_run: seq 2118 finished
Jun 17 22:38:41 gimli udevd[927]: udev_done: seq 2118, pid [8926] exit with 0, 0 seconds old
Jun 17 22:38:41 gimli udevd[927]: udev_event_run: seq 2119 forked, pid [8929], 'add' 'usb', 0 seconds old
Jun 17 22:38:41 gimli udevd-event[8929]: wait_for_sysfs: file '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-3/4-3:1.0/bus' appeared after 0 loops
Jun 17 22:38:41 gimli udevd-event[8929]: pass_env_to_socket: passed 323 bytes to socket '/org/freedesktop/hal/udev_event',
Jun 17 22:38:41 gimli udevd-event[8929]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: '/sbin/modprobe usb:v07CApB808d0200dc00dsc00dp00icFFisc00ip00'
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: '/sbin/modprobe' (stderr) 'FATAL: Module usb:v07CApB808d0200dc00dsc00dp00icFFisc00ip00 not found.'
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: '/sbin/modprobe' returned with status 1
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: 'udev_run_hotplugd usb'
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: 'udev_run_devd usb'
Jun 17 22:38:41 gimli udevd-event[8929]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8929]: udev_event_run: seq 2119 finished
Jun 17 22:38:41 gimli udevd[927]: udev_done: seq 2119, pid [8929] exit with 1, 0 seconds old
Jun 17 22:38:41 gimli udevd[927]: udev_event_run: seq 2120 forked, pid [8933], 'add' 'usb_device', 0 seconds old
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: '/bin/sh -c 'K=usbdev4.13; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: '/bin/sh' (stdout) 'bus/usb/004/013'
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: '/bin/sh' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8933]: udev_rules_get_name: rule applied, 'usbdev4.13' becomes 'bus/usb/004/013'
Jun 17 22:38:41 gimli udevd-event[8933]: udev_db_get_device: no db file to read /dev/.udev/db/class@usb_device@usbdev4.13: No such file or directory
Jun 17 22:38:41 gimli udevd-event[8933]: udev_node_add: creating device node '/dev/bus/usb/004/013', major = '189', minor = '396', mode = '0664', uid = '0', gid = '0'
Jun 17 22:38:41 gimli udevd-event[8933]: pass_env_to_socket: passed 275 bytes to socket '/org/freedesktop/hal/udev_event',
Jun 17 22:38:41 gimli udevd-event[8933]: pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: 'udev_run_hotplugd usb_device'
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: '/lib/udev/udev_run_hotplugd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: 'udev_run_devd usb_device'
Jun 17 22:38:41 gimli udevd-event[8933]: run_program: '/lib/udev/udev_run_devd' returned with status 0
Jun 17 22:38:41 gimli udevd-event[8933]: udev_event_run: seq 2120 finished
Jun 17 22:38:41 gimli udevd[927]: udev_done: seq 2120, pid [8933] exit with 0, 0 seconds old
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
