Hi,
Yesterday I bought a DVB-T Stick AVerTV DVB-T Volar [1], AVerMedia says
that the device run on Linux and provide instructions [2] to do it.
I follow the provided howto and the device still don't works.
This is the output of the command "lsusb -v -d 07ca:"
Bus 004 Device 005: ID 07ca:b808 AVerMedia Technologies, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x07ca AVerMedia Technologies, Inc.
idProduct 0xb808
bcdDevice 2.00
iManufacturer 1 AVerMedia
iProduct 2 A808
iSerial 3 500565102491
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
I have been looking the AVerMedia driver code (dvb-usb-a800) and the
device ID isn't listed. Can I add the device ID in the dvd-usb-ids.h
header file and recompile the source in order that device works.
I using Debian SID and the kernel is 2.6.16.
Sorry for my poor English.
Thanks a lot!
[1] http://www.averm.co.uk/avermedia/aver/products_digitvtuner_dvbtvolar.asp?show=2
[2] http://www.averm.co.uk/avermedia/docs/pdf/A800-README.txt
--
_______
|\_____/| Eduardo Bellido Bellido
| / \ | email: edubxb@xxxxxxxxx
|/_____\| JID: edubxb@xxxxxxxxxxxx
Web: http://edubxb.net
. . . . . . . . . . . . . . . . . . .
Attachment:
signature.asc
Description: Esta parte del mensaje =?ISO-8859-1?Q?est=E1?= firmada digitalmente
_______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
