Hi Joerg, Am Mittwoch, den 31.05.2006, 13:41 +0200 schrieb Joerg Knitter: > Hi, > > I am trying to get a DVB card working which has been built into a > Medion/Aldi PC around a year ago, using Kanotix-VDR (Kernel 2.6.16.16). > > As this was one of the first solutions that offered DVB-T, DVB-S and > analogue TV on one card, I believe that this is a LifeView clone as this > company was the only one at that time that produced cards with this > capabilities. No, LifeView announced such, but Creatix had already this one and later even the Medion Quad. > This is what I get from lspci: > > 0000:03:01.0 Multimedia controller: Philips Semiconductors > SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) > Subsystem: Creatix Polymedia GmbH Medion 7134 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (21000ns min, 8000ns max) > Interrupt: pin A routed to IRQ 225 > Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <available only to root> > > 0000:03:04.0 Multimedia controller: Philips Semiconductors > SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) > Subsystem: Creatix Polymedia GmbH: Unknown device 0005 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (21000ns min, 8000ns max) > Interrupt: pin A routed to IRQ 233 > Region 0: Memory at d8002000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <available only to root> > > > Although it says "unknown device 0005" in the second place, I believe to > get success messages with dmesg - at least for the DVB-T part that I need: > > > ... > saa7130/34: v4l2 driver version 0.2.14 loaded > ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 225 > saa7134[0]: found at 0000:03:01.0, rev: 1, irq: 225, latency: 32, mmio: > 0xd8000000 > saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected] > saa7134[0]: board init: gpio is 400000 > ts: Compaq touchscreen protocol output > saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50 > saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b > saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c > saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f > saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00 > saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ... > saa7134[0] Board has DVB-T > saa7134[0] Tuner type is 63 > ... > tuner 1-0061: chip found @ 0xc2 (saa7134[0]) > tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner) > tda9887 1-0043: chip found @ 0x86 (saa7134[0]) > saa7134[0]: registered device video0 [v4l2] > saa7134[0]: registered device vbi0 > saa7134[0]: registered device radio0 > ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 20 (level, low) -> IRQ 233 > saa7134[1]: found at 0000:03:04.0, rev: 1, irq: 233, latency: 32, mmio: > 0xd8002000 > saa7134[1]: subsystem: 16be:0005, board: UNKNOWN/GENERIC > [card=0,autodetected] > saa7134[1]: board init: gpio is 41002b > saa7134[1]: i2c eeprom 00: be 16 05 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 > saa7134[1]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50 > saa7134[1]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 21 02 51 96 2b > saa7134[1]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c > saa7134[1]: i2c eeprom 40: ff 24 00 c0 ff 1c 00 ff ff ff fd 79 44 9f c2 8f > saa7134[1]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[1]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[1]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > saa7134[1]: registered device video1 [v4l2] > saa7134[1]: registered device vbi1 > > > Unfortunately, VDR finally does not seem to find a working DVB device. > > Any hints? > The card is not fully investigated and not functional for DVB-S yet and Michael disabled the second saa7134 recently. DVB-T and DVB-S is announced at once. For other cards in the special blue PCI Slot on this kind of OEM machines we know both PCI bridges work at once without problems, for example on the later Medion Quad Tuner, but here the second is expected to be used with the not yet supported DVB-S. The tuner is marked, according a report on the video4linux-list 2005/05 EJ 11 > 3112 297 13801 SD1878/SHA 50537209 and there is the unsupported tda1008. > at its back is an small black chip: > TDA1008GHT > S46565.1 38 > ZSG04422 > Analog and DVB-T is expected to be functional on the hybrid FMD1216ME and the first saa7134. Try modprobe saa7134-dvb. The analog sound is not connected to the red MPC2 connector and soundcard/mobo. So you need saa7134-alsa or saa7134-oss for that or try to add the cable. Cheers, Hermann _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
