Am Donnerstag, 20. April 2006 18:13 schrieb Andrew de Quincey: > On Thursday 20 April 2006 17:07, norbert wrote: > > hello, > > > > i'm still having problems with my KNC 1 DVB-C card using a CAM. > > > > While using the card without the CAM plugged in I can watch all > > unscrambled channels perfectly. But when I plug in my Alphacrypt Light > > Cam there is no data coming out of /dev/dvb/adapter0/dvr0 using czap -r. > > > > 'modprobe budget-av' without the CAM and using 'czap -r ZDF' has > > following output: > > status 1f | signal 8a8a | snr f1f1 | ber 00195000 | unc 00000000 | > > FE_HAS_LOCK > > > > and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' will fill the file > > with data > > > > plugging in the CAM and doing 'czap -r ZDF' again will output nearly the > > same, except the ber value is now lower: > > status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | > > FE_HAS_LOCK > > > > and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' creates the file > > without filling it with any data > > > > even removing now the CAM doesn't change anything > > status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | > > FE_HAS_LOCK > > > > but when I doing rmmod budget-av & modprobe budget-av everything works > > for the unscrambled channels perfectly > > I know what this is I think - I have a patch which should fix it.. will > sort it out later. Does your card use a tda10021 demod? Yes, thats right. _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
