hello, i'm still having problems with my KNC 1 DVB-C card using a CAM. While using the card without the CAM plugged in I can watch all unscrambled channels perfectly. But when I plug in my Alphacrypt Light Cam there is no data coming out of /dev/dvb/adapter0/dvr0 using czap -r. 'modprobe budget-av' without the CAM and using 'czap -r ZDF' has following output: status 1f | signal 8a8a | snr f1f1 | ber 00195000 | unc 00000000 | FE_HAS_LOCK and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' will fill the file with data plugging in the CAM and doing 'czap -r ZDF' again will output nearly the same, except the ber value is now lower: status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | FE_HAS_LOCK and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' creates the file without filling it with any data even removing now the CAM doesn't change anything status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | FE_HAS_LOCK but when I doing rmmod budget-av & modprobe budget-av everything works for the unscrambled channels perfectly nw _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
