On Thursday 20 April 2006 17:07, norbert wrote: > hello, > > i'm still having problems with my KNC 1 DVB-C card using a CAM. > > While using the card without the CAM plugged in I can watch all unscrambled > channels perfectly. But when I plug in my Alphacrypt Light Cam there is no > data coming out of /dev/dvb/adapter0/dvr0 using czap -r. > > 'modprobe budget-av' without the CAM and using 'czap -r ZDF' has following > output: > status 1f | signal 8a8a | snr f1f1 | ber 00195000 | unc 00000000 | > FE_HAS_LOCK > > and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' will fill the file with > data > > plugging in the CAM and doing 'czap -r ZDF' again will output nearly the > same, except the ber value is now lower: > status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | > FE_HAS_LOCK > > and doing 'cat /dev/dvb/adapter0/dvr0 > /tmp/test' creates the file > without filling it with any data > > even removing now the CAM doesn't change anything > status 1f | signal 8a8a | snr f1f1 | ber 00029a90 | unc 00000000 | > FE_HAS_LOCK > > but when I doing rmmod budget-av & modprobe budget-av everything works for > the unscrambled channels perfectly I know what this is I think - I have a patch which should fix it.. will sort it out later. Does your card use a tda10021 demod? _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
