Hi, after some initial trouble with the dvb-t receiver (as described in another thread "DiBcom USB2.0 ..."), I was able to tune. in order to find all channels transmitted in Sydney, the following change was needed on the initial scan file. In addition to that, I'd propose to change the file name to au-Sydney_North_Shore --- util/scan/dvb-t/au-sydney_north_shore.orig 2006-04-19 21:20:15.000000000 +1000 +++ util/scan/dvb-t/au-sydney_north_shore 2006-04-21 02:01:01.000000000 +1000 @@ -1,16 +1,16 @@ -# Australia / Sydney / North Shore (aka Artarmon/Gore Hill) +# Australia / Sydney / North Shore (aka Artarmon/Gore Hill/Willoughby) # # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy # # ABC VHF12 T 226500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE # Seven VHF6 -T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE +T 177500000 7MHz 2/3 NONE QAM64 8k 1/16 NONE # Nine VHF8 T 191625000 7MHz 3/4 NONE QAM64 8k 1/16 NONE # Ten VHF11 T 219500000 7MHz 3/4 NONE QAM64 8k 1/16 NONE # SBS UHF34 T 571500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE -# D44 UHF35 (testing) -T 578500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE +# D44 UHF35 +T 578500000 7MHz 2/3 NONE QAM64 8k 1/32 NONE _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
