Sirs:
I did some tests with a voltmeter and an oscilloscope a few days
ago:
dvb-apps/test/setvoltage: doesn't seem to work
dvb-apps/test/set22k: works OK
dvb-apps/test/sendburst: doesn't seem to work
dvb-apps/test/diseqc: seems to work
An odd symptom is that when I ran 'dvbscan', then the voltage did change
(from 13v to 19v), but I couldn't use 'setvoltage' to change it.
On Mon, 3 Apr 2006, Ken Harris wrote:
Sirs:
FYI, Manu's fixes work with the VP1025 and Fedora Core 4:
DVB: registering new adapter (bttv0).
dst(0) dst_get_device_id: Recognise [DST-03T]
dst(0) dst_get_device_id: Unsupported
dst(0) dst_get_device_id: [DST-03T] has a [Fujitsu MB86A15]
DST type flags : 0x2 ts204 0x4 symdiv 0x10 firmware version = 2
dst(0) dst_get_mac: MAC Address=[00:08:ca:17:49:00]
DVB: registering frontend 0 (DST DVB-S)...
I didn't do any of the modprobe.conf stuff.
On Fri, 31 Mar 2006, Ken Harris wrote:
I tried to compile Manu's modules on Fedora Core 5, but I got an
error:
cgi-bin-hgwebdir-cgi-v4l-algo-test-70266933831b/v4l/flexcop-usb.c:547:
error: unknown field 'owner' specified in initializer
FYI, it compiled fine with Fedora Core 4, but I can't test it with
the VP1025 because it's at work, so I should be able to test it on Monday.
On Fri, 31 Mar 2006, Ray Clouse wrote:
This is the key email. Get that kernel module and you should be on your
way.
Also, you need the following in modprobe.conf:
options dst dst_algo=0
options bttv card=0x71
install bttv /sbin/modprobe --ignore-install bttv && /sbin/modprobe
dvb_bt8xx
remove dvb { /sbin/modprobe -r dvb-bt8xx; }
alias char-major-81 bttv
---------- Forwarded message ----------
From: Manu Abraham <abraham.manu@xxxxxxxxx>
Date: Feb 8, 2006 10:41 AM
Subject: Re: Twinhan 1025 problem - Knoppix works, FC4 &
Ubuntu don't
To: Wei Weng <wweng@xxxxxxxxxxx>
Cc: Ray Clouse <rclouse@xxxxxxxxx>, linux-dvb@xxxxxxxxxxx
Wei Weng wrote:
Looks exactly like the problem I had been having. (No, I was not able
to figure it out)
Please do check whether this helps ..
http://www.thadathil.net/cgi-bin/hgwebdir.cgi/v4l-algo-test?cmd=archive;node=70266933831bc8efd85ecf808651595f79aede60;type=bz2
For build instructions please do refer to the v4l-dvb build instructions.
A simple make should build in most cases. Would like to get your feedback
on this.
Manu
_______________________________________________
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
