Hi Stephen, OK, I can feel a moment of clarity coming here...what usb cable :-) ? Oh you are kidding me ?!? Just checked the Dvico website and there is a lovely pic showing what has to happen. The manual doesn't show that... Thanks very much for all the help guys....<sound of my palm smacking my forehead> Regards Lachlan ---- Collier Family <judithc@xxxxxxxxxxxxxx> wrote: > Lachlan, > > I hope the USB cable is plugged in - it was the first mistake I made. I > don't see the USB side of the card in your logs such as below > > Feb 14 18:42:26 mythmaster kernel: dvb-usb: found a 'DViCO FusionHDTV DVB-T > Dual USB' in cold state, will try to load a firmware > > > -Stephen Collier > > > ----- Original Message ----- > From: "Lachlan Kidd" <lkidd@xxxxxxxxxxxxxx> > To: <linux-dvb@xxxxxxxxxxx>; <mkrufky@xxxxxxxxx> > Sent: Monday, February 20, 2006 7:16 PM > Subject: Re: Second tuner on Fusion Dual Digital > > > > Thanks for the response Mike. I've tried those steps and still no joy. > > I can't see anything in the logs (/var/log/messages or dmesg) about the > > second tuner or the firmware. From others posts, I think I should see > > something about the driver going looking for the fw. Is this correct ? Is > > there a specific module which needs to be loaded ? > > I'm running 2.6.15 > > Thanks again, Regards > > Lachlan > > > > lsmod > > Module Size Used by > > dvb_usb_cxusb 16516 0 > > dvb_usb 19848 1 dvb_usb_cxusb > > parport_pc 28612 1 > > lp 13512 0 > > parport 37064 2 parport_pc,lp > > autofs4 20996 0 > > eeprom 7568 0 > > it87 21284 0 > > hwmon_vid 2944 1 it87 > > i2c_isa 5504 1 it87 > > sunrpc 153916 1 > > xfs 579016 1 > > exportfs 6784 1 xfs > > dm_mod 60824 0 > > video 16004 0 > > button 6928 0 > > battery 9732 0 > > ac 5124 0 > > nvidia 4090832 12 > > ipv6 262880 20 > > ohci1394 35380 0 > > ieee1394 303448 1 ohci1394 > > ohci_hcd 22148 0 > > ehci_hcd 35336 0 > > cx88_blackbird 20508 0 > > cx8800 33676 1 cx88_blackbird > > compat_ioctl32 1280 1 cx8800 > > v4l1_compat 12932 1 cx8800 > > v4l2_common 15744 2 cx88_blackbird,cx8800 > > i2c_nforce2 7168 0 > > cx88_dvb 12292 0 > > cx8802 12292 2 cx88_blackbird,cx88_dvb > > cx88xx 61860 4 cx88_blackbird,cx8800,cx88_dvb,cx8802 > > ir_common 27140 1 cx88xx > > btcx_risc 5000 3 cx8800,cx8802,cx88xx > > tveeprom 14992 1 cx88xx > > videodev 10112 3 cx88_blackbird,cx8800,cx88xx > > cx88_vp3054_i2c 4352 1 cx88_dvb > > i2c_algo_bit 9352 2 cx88xx,cx88_vp3054_i2c > > mt352 6660 2 dvb_usb_cxusb,cx88_dvb > > or51132 9860 1 cx88_dvb > > video_buf_dvb 6788 1 cx88_dvb > > dvb_core 84008 2 dvb_usb,video_buf_dvb > > video_buf 22276 6 > > cx88_blackbird,cx8800,cx88_dvb,cx8802,cx88xx,video_buf_dvb > > nxt200x 14468 1 cx88_dvb > > cx24123 9220 1 cx88_dvb > > lgdt330x 7964 2 dvb_usb_cxusb,cx88_dvb > > cx22702 6660 2 dvb_usb_cxusb,cx88_dvb > > i2c_core 22144 15 > > dvb_usb,eeprom,it87,i2c_isa,i2c_nforce2,cx88_dvb,cx88xx,tveeprom,i2c_algo_bit,mt352,or51132,nxt200x,cx24123,lgdt330x,cx22702 > > dvb_pll 11908 6 > > dvb_usb_cxusb,dvb_usb,cx88_dvb,or51132,nxt200x,cx22702 > > snd_intel8x0 32924 0 > > snd_ac97_codec 91040 1 snd_intel8x0 > > snd_ac97_bus 2688 1 snd_ac97_codec > > snd_pcm_oss 53664 0 > > snd_mixer_oss 19072 1 snd_pcm_oss > > snd_pcm 93444 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > > snd_timer 26500 1 snd_pcm > > snd 58084 6 > > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > > soundcore 10336 1 snd > > snd_page_alloc 11272 2 snd_intel8x0,snd_pcm > > forcedeth 24580 0 > > floppy 63556 0 > > ext3 135688 2 > > jbd 61204 1 ext3 > > > > Feb 20 18:26:22 localhost kernel: Linux video capture interface: v1.00 > > Feb 20 18:26:22 localhost kernel: cx2388x dvb driver version 0.0.5 loaded > > Feb 20 18:26:22 localhost kernel: CORE cx88[0]: subsystem: 18ac:db50, > > board: DViCO FusionHDTV DVB-T Dual Digita > > l [card=44,autodetected] > > Feb 20 18:26:22 localhost kernel: TV tuner 4 at 0x1fe, Radio tuner -1 at > > 0x1fe > > Feb 20 18:26:22 localhost kernel: ACPI: PCI Interrupt Link [LNK3] enabled > > at IRQ 12 > > Feb 20 18:26:22 localhost kernel: PCI: setting IRQ 12 as level-triggered > > Feb 20 18:26:22 localhost kernel: ACPI: PCI Interrupt 0000:01:06.2[A] -> > > Link [LNK3] -> GSI 12 (level, low) -> > > IRQ 12 > > Feb 20 18:26:22 localhost kernel: cx88[0]/2: found at 0000:01:06.2, rev: > > 5, irq: 12, latency: 32, mmio: 0xdf000 > > 000 > > Feb 20 18:26:22 localhost kernel: cx88[0]/2: cx2388x based dvb card > > Feb 20 18:26:22 localhost kernel: DVB: registering new adapter (cx88[0]). > > Feb 20 18:26:22 localhost kernel: DVB: registering frontend 0 (Zarlink > > MT352 DVB-T)... > > Feb 20 18:26:22 localhost kernel: i2c_adapter i2c-1: nForce2 SMBus adapter > > at 0x5000 > > Feb 20 18:26:22 localhost kernel: i2c_adapter i2c-2: nForce2 SMBus adapter > > at 0x5100 > > Feb 20 18:26:22 localhost kernel: cx2388x v4l2 driver version 0.0.5 loaded > > Feb 20 18:26:22 localhost kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> > > Link [LNK3] -> GSI 12 (level, low) -> > > IRQ 12 > > Feb 20 18:26:22 localhost kernel: cx88[0]/0: found at 0000:01:06.0, rev: > > 5, irq: 12, latency: 32, mmio: 0xde000 > > 000 > > Feb 20 18:26:22 localhost kernel: cx88[0]/0: registered device video0 > > [v4l2] > > Feb 20 18:26:22 localhost kernel: cx88[0]/0: registered device vbi0 > > Feb 20 18:26:22 localhost kernel: set_control id=0x980900 reg=0x310110 > > val=0x00 (mask 0xff) > > Feb 20 18:26:22 localhost kernel: set_control id=0x980901 reg=0x310110 > > val=0x3f00 (mask 0xff00) > > Feb 20 18:26:22 localhost kernel: set_control id=0x980903 reg=0x310118 > > val=0x00 (mask 0xff) > > Feb 20 18:26:22 localhost xinetd[3697]: xinetd Version 2.3.13 started with > > libwrap loadavg options compiled in. > > Feb 20 18:26:22 localhost kernel: set_control id=0x980902 reg=0x310114 > > val=0x5a7f (mask 0xffff) > > > > lspci > > 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) > > (rev a2) > > 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev > > a2) > > 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev > > a2) > > 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev > > a2) > > 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev > > a2) > > 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev > > a2) > > 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) > > 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) > > 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) > > 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) > > 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) > > 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet > > Controller (rev a1) > > 00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia > > audio [Via VT82C686B] (rev a2) > > 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio > > Controler (MCP) (rev a1) > > 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev > > a3) > > 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) > > 00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE > > 1394) Controller (rev a3) > > 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2) > > 01:06.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05) > > 01:06.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05) > > 02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - > > nForce GPU] (rev a3) > > [root@localhost ~]# > > > > > > > > > > > > > > > > > > > > > > > > > > On 2/18/06, lkidd@xxxxxxxxxxxxxx <lkidd@xxxxxxxxxxxxxx> wrote: > > > > >> Hello, > > >> I've been reading on this list that a few people have had some success > > >> in getting both tuners > > going. Is there any chance on posting a how-to on what was required ? I've > > got the first tuner going no probs and love it. The second tuner is > > causing some greif. From what I've read, I've downloaded the firmware, and > > loaded dvb_usb_cxusb and dvb_usb . Somewhat of a concern is the both > > dmesg and var/log/messages are very quite about the whole thing. The > > modules load but nothing else is repored. Also, what /dev entry does the > > usb tuner show up under ? > > >> Thanks, Regards > > >> Lachlan > > > > > > 1) install mercurial > > 2) hg clone http://linuxtv.org/hg/v4l-dvb > > 3) cd v4l-dvb > > 4) linux/Documentation/dvb/get_dvb_firmware bluebird > > 5) mv dvb-usb-bluebird-01.fw /usr/lib/hotplug/firmware/ > > 6) make > > 7) make install > > 8) reboot > > > > I hope this helps, > > Mike > > > > > > > > _______________________________________________ > > > > linux-dvb@xxxxxxxxxxx > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
