Op Zo, februari 12, 2006 16:48 schreef Manu Abraham: > Fiete Lange wrote: > >> Hi all, >> >> >> I started using linux dvb drivers with the Twinhan cab-CI with >> alphacrypt 3.05 on a SuSE 10.0 distro (kernel 2.6.13-15). I've tried >> different earlier CVS versions, one snapshot (januari 15th 2006) and >> some recent HG versions. The best result up till now is a screen filled >> with mostly green squares, sometimes outlines of e.g. a tennis court are >> recognizable. Basically things work ok (tuning, getting a signal lock). >> I'm working with FTA channels. The last step was to >> install the most recent kernel from kernel.org (2.6.15.4-default), >> nothing changed with the picture. I've checked the Twinhan card with win >> xp (dual boot machine) and signalstrength and picture quality are fine. >> I'm living in Netherland, cable provider is TVHome. >> Anyone else with this problem? >> Known solutions? >> > > Can you check whether this works for you ? > > > http://www.thadathil.net/cgi-bin/hgwebdir.cgi/v4l-algo-test?cmd=archive;n > ode=228cf1ee7069d261b5e9ff30ba17ba928b068ff4;type=bz2 > > > build procedures are the same. make; make install should work in most > cases. > > dst requires an additional module parameter dst_algo=0 Please do let know > whether this solves. > > > Manu > > > Hi Manu, Thanks for your quick respons! After installing I was not able to tune. I've set the verbose level of the dst to 4 and this is the output. As I'm working on a test machine I could do further testing. Thank you. Fiete dst(0) dst_set_frontend: Set Frequency=[247000000] dst(0) dst_set_symbolrate: set symrate 6875000 dst(0) dst_set_symbolrate: DCT-CI dst(0) dst_write_tuna: type_flags 0x219 dst(0) dst_comm_init: Initializing DST. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) rdc_reset_state: Resetting state machine dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst(0) dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 03 c4 d8 00 1a db 40 2c ] dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x03) dst(0) dst_error_recovery: Trying to return from previous errors. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x03) dst(0) dst_error_recovery: Trying to return from previous errors. dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] dst(0) write_dst: RDC 8820 RESET dst(0) dst_error_bailout: Trying to bailout from previous error. dst(0) rdc_8820_reset: Resetting DST dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst(0) dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst(0) dst_write_tuna: write not successful dst(0) dst_set_freq: set Frequency 247000000 _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
