Udo van den Heuvel wrote: > > I have no suitable channels.conf for the Digitenne system yet. > > I do have a conf file for Digitenne in a slightly different format, > > though, which has frequencies, etc. The file I have has lines like: Nederland 1:578000000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_1_2:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE:1011:1012 If I add a '0:' after HIERARCHY_NONE: (after reading http://users.pandora.be/nespa/dvb-t/dec2540/) I can tzap a bit. If I choose a different transponder I get signal: # tzap 'RTL 4' using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/root/.tzap/channels.conf' tuning to 762000000 Hz video pid 0x0000, audio pid 0x07db status 00 | signal 0000 | snr ffff | ber 0001fffe | unc 00000000 | status 00 | signal 8686 | snr ffff | ber 0001fffe | unc 00000000 | status 00 | signal 8686 | snr ffff | ber 0001fffe | unc 00000000 | But no snr info or ber. Maybe because of no FTA status? (encrypted) Or is it my channels.conf editing? I read that channel Nederland 2 was FTA on Digitenne. If that is still the case I need to find out the channels.conf line for the correct transponder. Anyone? And how could I check out the radio stations? Kind regards, Udo _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
