Hello I have a SCM Viaccess CAM with a Nova-CI S card. I need to upgrade the firmware of the card using SCM's procedure [1]. This procedure boils down to: - tune to Italiasat (don't let you children run around you during this procedure ;-) ) - hot plug the CAM - wait for CAM messages confirming the firmware download. With budget-ci, nothing special happens and the CAM is initialized as usual. Pierre Juhen reported that firmware upgrade works with a Nexus-S. I've looked at the dvb-core and budget-ci code. If I understood correctly, a reset is sent to the CAM at module initialization time *and* when a CAM is inserted. In the last case, a reset is unnecessary as the CAM was powered off before insertion. I believe that sending a reset to the CAM will prevent the firmware upgrade. So budget-ci (and may be dvb-core) must be modified so as not to send a reset to the CAM when this one is inserted. Can someone help me to modify budget-ci ? Thanks [1] http://www.scmmicro.com/support/dtv_faq.html#ViaccessFAQ _______________________________________________ linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
