Sweet. Tuner is working. Forgot to plug in the aerial when I left for the office. Now I will have to do some work. Doh > strangedodgydude@xxxxxxxxxxxxxxxxxxx wrote: > >>Now I am a little confused. >>I am following the following walk through, >>http://wilsonet.com/mythtv/fcmyth.php >>Assuming the drivers are already installed (as message shows the loading >>of the driver) how do I get the test/channel scanner to connect to it? >> >>Extract of /var/log/message >>Jan 11 06:53:42 mythy kernel: bttv0: Bt878 (rev 17) at 0000:02:00.0, irq: >>9, lat >>ency: 32, mmio: 0xf4000000 >>Jan 11 06:53:42 mythy kernel: bttv0: detected: DViCO FusionHDTV DVB-T >> Lite >>[card >>=128], PCI subsystem ID is 18ac:db10 >>Jan 11 06:53:42 mythy kernel: bttv0: using: DViCO FusionHDTV DVB-T Lite >>[card=12 >>8,autodetected] >>Jan 11 06:53:42 mythy kernel: bttv0: using tuner=-1 >>Jan 11 06:53:43 mythy kernel: bttv0: add subdevice "dvb0" >> >> > It looks like PART of the driver loaded... now do: > > modprobe dvb-bt8xx > > (it doesnt load automatically unless you specify in your modprobe.conf > file) > > -Mike >
