Hi all. I saked before celebration but I still have a problem. The problem: Very low and bad signal in Linux, but in WinXP everything OK. I expect that problem in Viterby decoder, 3/4, 7/8 error correction. szap ?-l C-BAND -n 1 -r reading channels from file '/home/artem/.szap/channels.conf' zapping to 1 'Kultura dubl-1': sat 0, frequency = 3645 MHz H, symbolrate 28000000, vpid = 0x0065, apid = 0x0066 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 1f | signal 4400 | snr 1800 | ber fffffffe | unc fffffffe | FE_HAS_LOCK status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | FE_HAS_LOCK status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | FE_HAS_LOCK status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | FE_HAS_LOCK status 1f | signal 0000 | snr 1a00 | ber fffffffe | unc fffffffe | FE_HAS_LOCK status 00 | signal 0000 | snr 1200 | ber fffffffe | unc fffffffe | status 00 | signal 0000 | snr 1200 | ber fffffffe | unc fffffffe | When I watch TV by mplayer /dev/dvb/adapter0/dvr0 I have a very bad signal and for a short time. I mean that I can't watch TV or record by cat /dev/dvb/adapter0/dvr0 > file0.mpeg I think that "ber" and "unc" is't correct value.
