BER (Bit Error Rate) and UNC (Uncorrectable Blocks) I believe aren't implemented or are not available on Twinhan cards (at least the 102G & 1020a cards I have). It would be nice if they were considering MythTV uses these as well. - Mark. On 1/3/06, Artem <artem.bond@xxxxxxxxx> wrote: > > Hi all. > > I saked before celebration but I still have a problem. > > The problem: Very low and bad signal in Linux, but in WinXP everything OK. > I expect that problem in Viterby decoder, 3/4, 7/8 error correction. > > szap -l C-BAND -n 1 -r > reading channels from file '/home/artem/.szap/channels.conf' > zapping to 1 'Kultura dubl-1': > sat 0, frequency = 3645 MHz H, symbolrate 28000000, vpid = 0x0065, apid = > 0x0066 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 1f | signal 4400 | snr 1800 | ber fffffffe | unc fffffffe | > FE_HAS_LOCK > status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | > FE_HAS_LOCK > status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | > FE_HAS_LOCK > status 1f | signal 4500 | snr 1800 | ber fffffffe | unc fffffffe | > FE_HAS_LOCK > status 1f | signal 0000 | snr 1a00 | ber fffffffe | unc fffffffe | > FE_HAS_LOCK > status 00 | signal 0000 | snr 1200 | ber fffffffe | unc fffffffe | > status 00 | signal 0000 | snr 1200 | ber fffffffe | unc fffffffe | > > When I watch TV by > mplayer /dev/dvb/adapter0/dvr0 > I have a very bad signal and for a short time. I mean that I can't watch > TV or > record by cat /dev/dvb/adapter0/dvr0 > file0.mpeg > I think that "ber" and "unc" is't correct value. > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20060103/10e86928/attachment.htm
