Michael Krufky wrote: >On 12/11/05, Michael Krufky <mkrufky@xxxxxxxxx> wrote: > > >>On 12/10/05, Michael Krufky <mkrufky@xxxxxxxxx> wrote: >> >> >>>On 12/10/05, Todd Ignasiak <ignasiak@xxxxxxxxx> wrote: >>> >>> >>>>On 12/2/05, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote: >>>> >>>> >>>>>Todd Ignasiak wrote: >>>>> >>>>> >>>>>>On 11/29/05, CityK <CityK@xxxxxxxxxx> wrote: >>>>>> >>>>>> >>>>>> >>>>>>>Michael Krufky wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>>CityK wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>A few months ago Taylor posted that he had put together a patch for >>>>>>>>>the original Fusion 3 Gold (18ac:d800) : >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005008.html >>>> >>>> >>>>>>>>>I didn't see any or perhaps missed the follow up this card, but I'm >>>>>>>>>mildly curious if: >>>>>>>>>a) Taylor got it working (and is anyone is using the board)? >>>>>>>>> and >>>>>>>>>b) whether or not the it is working with digital cable? ... (although >>>>>>>>>its prospects are poor, as discussed in both >>>>>>>>> >>>>>>>>> >>>>>>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005034.html >>>>>>>> >>>>>>>> >>>>>>>>>and >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005035.html) >>>> >>>> >>>>>>>>Taylor never showed us a patch... I always wondered why. >>>>>>>> >>>>>>>>Anyhow, based on the DViCO Windows driver INF file, the following >>>>>>>>patch should be all that's necessary, unless the board has different >>>>>>>>GPIO programming. >>>>>>>> >>>>>>>>I don't want to apply this unless someone can test it and confirm that >>>>>>>>it works. It is very likely that a new card entry will be needed for >>>>>>>>alternate GPIO settings, although the DViCO cards are known to work >>>>>>>>with the wrong GPIO settings. :-/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>------------------------------------------------------------------------ >>>>>>> >>>>>>> >>>>>>>>linux/drivers/media/video/cx88/cx88-cards.c | 4 >>>>>>>> >>>>>>>> >>>>++++ >>>> >>>> >>>>>>>>1 file changed, 4 insertions(+) >>>>>>>> >>>>>>>>--- >>>>>>>> >>>>>>>> >>>>v4l-dvb.orig/linux/drivers/media/video/cx88/cx88-cards.c >>>>2005-11-25 05:24:13.000000000 -0500 >>>> >>>> >>>>>>>>+++ >>>>>>>> >>>>>>>> >>>>v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c >>>>2005-11-29 01:06: 57.000000000 -0500 >>>> >>>> >>>>>>>>@@ -1015,6 +1015,10 @@ >>>>>>>> .card = CX88_BOARD_KWORLD_DVB_T, >>>>>>>> },{ >>>>>>>> .subvendor = 0x18ac, >>>>>>>>+ .subdevice = 0xd800, >>>>>>>>+ .card = >>>>>>>> >>>>>>>> >>>>CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, >>>> >>>> >>>>>>>>+ },{ >>>>>>>>+ .subvendor = 0x18ac, >>>>>>>> .subdevice = 0xd810, >>>>>>>> .card = >>>>>>>> >>>>>>>> >>>>CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, >>>> >>>> >>>>>>>> },{ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>Michael Krufky wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>>CityK wrote: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>Cool. As you already know, I picked this last part of the >>>>>>>>>discussion up on the DVB list. Perhaps Taylor or someone else will >>>>>>>>>let us know. >>>>>>>>> >>>>>>>>> >>>>>>>>Yes... I also have information about FusionHDTV II ... If anybody >>>>>>>>out there has one, please let me know, and I'll send you a patch to >>>>>>>> >>>>>>>> >>>>test. >>>> >>>> >>>>>>I have an older Fusion card. I'm not sure if it's a Fusion II or III, >>>>>> but it's pre-QAM. I'll dig it out of the storage box & check it >>>>>>out. >>>>>> >>>>>>If someone has a patch, or needs other info on the card, let me know. >>>>>> >>>>>> >>>>>When you determine exactly which card it is, let me know and provide the >>>>>pci id... i have some nice docs from dvico with almost all the info that >>>>>i need, provided that it uses frontend demod's and tuner already >>>>> >>>>> >>>>supported. >>>> >>>> >>>>>Glue code is easy. >>>>> >>>>>-Mike >>>>> >>>>> >>>>> >>>> I finally located that card. It's labeled "FusionHDTV II" >>>> It has a Conexant Fusion 878A / 25878-13 chip, and an Oren OR51211AHQC. >>>> I can't tell what type of tuner is on the board. >>>> >>>> >>>Todd- >>> >>>Great! I can whip together a patch for you to test.... I believe >>>that I have the tuner information in my files at home. I leave for >>>vacation tomorrow morning, so I will post a patch for testing towards >>>the end of next week. >>> >>>Thanks, >>> >>>_Michael >>> >>> >>Todd- >> >>I'm going to need the PCI Subsystem ID of the board that you have... >>There are a few different versions of that card floating around, some >>OEM versions. >> >>I would guess that you have the 18ac:d200 model, but here are some others: >> >>; 0xD200 Philips1236D + OREN >>; 0xD210 TEMIC4402 + OREN >>; 0xD220 TEMIC4402 + OREN (OEM1) >>; 0xD230 TEMIC4402 + OREN (OEM2) >>; 0xD240 TEMIC4402 + OREN (OEM3) >> >>For now, I have assummed that your board is the top listed one... I >>have put together an experimental patch based on this, but it will >>probably not work. >> >>It looks to me as if this board design is very similar to that of the >>bt8xx-based pchdtv card. You are going to need or51211 firmware, >>which I don't know where to get, but it is probably covered in the >>dvb-get-firmware script. >> >>I took a bunch of guesses here, but it was a great way to kill some time. >> >>I've included two alternate tuner possibilities in the bttv-cards >>struct (commented) If the one that I picked doesnt work, try one of >>them. >> >>You're welcome to try it: >> >>http://linuxtv.org/~mkrufky/fusionhdtv2.patch >> >>Expect problems -- just try to capture all the logs and email them to >>me -- I'll be able to do more when I get back from vacation. >> >> > >Ooops! I forgot to mention, If I picked the wrong pci:id, and your >board doesnt get detected with this patch, you can force it to load by >doing the following: > >modprobe bttv card=144 >modprobe dvb-bt8xx > Todd- I never heard back from you.... How did that patch work on your board? I need that PCI subsystem ID from you..... There are a few different versions of the FusionHDTV3 Gold, and each one uses a different tuner. Once again, I assumed that you have the 18ac:d200 model, using the Philips 1236d... Please let me know if that patch works for you... If so, I'll clean it up and apply it to cvs, so that others can use that card in their systems as well. Cheers, Mike
