Todd Ignasiak wrote: > On 11/29/05, CityK <CityK@xxxxxxxxxx> wrote: > >>Michael Krufky wrote: >> >>>CityK wrote: >>> >>> >>>>A few months ago Taylor posted that he had put together a patch for >>>>the original Fusion 3 Gold (18ac:d800) : >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005008.html >>>> >>>>I didn't see any or perhaps missed the follow up this card, but I'm >>>>mildly curious if: >>>>a) Taylor got it working (and is anyone is using the board)? >>>> and >>>>b) whether or not the it is working with digital cable? ... (although >>>>its prospects are poor, as discussed in both >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005034.html >>>>and >>>>http://www.linuxtv.org/pipermail/linux-dvb/2005-September/005035.html) >>> >>>Taylor never showed us a patch... I always wondered why. >>> >>>Anyhow, based on the DViCO Windows driver INF file, the following >>>patch should be all that's necessary, unless the board has different >>>GPIO programming. >>> >>>I don't want to apply this unless someone can test it and confirm that >>>it works. It is very likely that a new card entry will be needed for >>>alternate GPIO settings, although the DViCO cards are known to work >>>with the wrong GPIO settings. :-/ >>> >>> >>>------------------------------------------------------------------------ >>> >>> linux/drivers/media/video/cx88/cx88-cards.c | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>>--- v4l-dvb.orig/linux/drivers/media/video/cx88/cx88-cards.c 2005-11-25 05:24:13.000000000 -0500 >>>+++ v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c 2005-11-29 01:06:57.000000000 -0500 >>>@@ -1015,6 +1015,10 @@ >>> .card = CX88_BOARD_KWORLD_DVB_T, >>> },{ >>> .subvendor = 0x18ac, >>>+ .subdevice = 0xd800, >>>+ .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, >>>+ },{ >>>+ .subvendor = 0x18ac, >>> .subdevice = 0xd810, >>> .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, >>> },{ >>> >> >> >>Michael Krufky wrote: >> >>>CityK wrote: >>> >>>>Cool. As you already know, I picked this last part of the >>>>discussion up on the DVB list. Perhaps Taylor or someone else will >>>>let us know. >>> >>>Yes... I also have information about FusionHDTV II ... If anybody >>>out there has one, please let me know, and I'll send you a patch to test. > > > I have an older Fusion card. I'm not sure if it's a Fusion II or III, > but it's pre-QAM. I'll dig it out of the storage box & check it > out. > > If someone has a patch, or needs other info on the card, let me know. When you determine exactly which card it is, let me know and provide the pci id... i have some nice docs from dvico with almost all the info that i need, provided that it uses frontend demod's and tuner already supported. Glue code is easy. -Mike
