Today, I finally got the opportunity to try my FusionHDTV 5 Lite card on a Fedora Core install. I obtained the kernel kernel-2.6.13-1.1532_FC4.src.rpmand recompiled using V4L Wiki instructions. Then, I compiled the current v4l and dvb trees from CVS. Right now I'm just testing out analog. Here's what I get from dmesg: bttv0: Bt878 (rev 17) at 0000:00:11.0, irq: 11, latency: 64, mmio: 0xcddfe000 bttv0: detected: DViCO FusionHDTV 5 Lite [card=135], PCI subsystem ID is 18ac:d500 bttv0: using: DViCO FusionHDTV 5 Lite [card=135,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: using tuner=64 tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) bttv0: registered device video0 bttv0: registered device vbi0 tuner 1-0061: tuner type not set bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 bt878(0): Bt878 (rev 17) at 00:11.1, irq: 11, latency: 64, memory: 0xcddff000 ... DVB: registering new adapter (bttv0). DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... Starting tvtime gives me several of the 'tuner 1-0061: tuner type not set' messages. What might be going on? This card works under windows. - Jate S. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051029/45396720/attachment.htm
