Kirk Lapray wrote: > On 10/27/05, *Michael Krufky* <mkrufky@xxxxxxx > <mailto:mkrufky@xxxxxxx>> wrote: > > Although everything is working well, I am still getting these errors > when I first run azap: > > nxt200x: NXT2004 Detected > DVB: registering new adapter (saa7133[0]). > DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)... > nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)... > nxt2004: Waiting for firmware upload(2)... > nxt2004: Firmware upload complete > nxt200x: Error reading multireg register 0xA6 > nxt200x: Error reading multireg register 0xE6 > nxt200x: Error reading multireg register 0xE6 > > Never more than 3 lines in the log... It is tuning and delivering > my ts > stream just fine. > > I know the nxt2002 driver used dprintk instead of printk in the > multireg read and write commands. We could switch it to dprintk and > then you would only see these errors if you loaded the driver with > debug set. Kirk - So... I guess that translates to "those errors don't matter." Would that be the correct assessment? I'm not worried about whether I am *seeing* them or not... I was only concerned about whether it was indicating something worth paying attention to. -Mike
