Kirk- I forgot to mention this: Although everything is working well, I am still getting these errors when I first run azap: nxt200x: NXT2004 Detected DVB: registering new adapter (saa7133[0]). DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM frontend)... nxt2004: Waiting for firmware upload (dvb-fe-nxt2004.fw)... nxt2004: Waiting for firmware upload(2)... nxt2004: Firmware upload complete nxt200x: Error reading multireg register 0xA6 nxt200x: Error reading multireg register 0xE6 nxt200x: Error reading multireg register 0xE6 Never more than 3 lines in the log... It is tuning and delivering my ts stream just fine. mk@plateau:~$ ./azap WNYW_DT -r using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 669000000 Hz video pid 0x03ee, audio pid 0x03ef status 00 | signal fba0 | snr db4c | ber 00007ff8 | unc 00000000 | status 00 | signal f0f0 | snr ea60 | ber 00000390 | unc 00000000 | status 1f | signal fb50 | snr ddb0 | ber 00001510 | unc 00000077 | FE_HAS_LOCK status 1f | signal fb50 | snr df58 | ber 00001318 | unc 00000000 | FE_HAS_LOCK status 1f | signal fb80 | snr de0e | ber 00000f20 | unc 00000000 | FE_HAS_LOCK status 1f | signal fc80 | snr df86 | ber 00000a18 | unc 00000063 | FE_HAS_LOCK status 1f | signal fc40 | snr de0e | ber 00001020 | unc 00000000 | FE_HAS_LOCK status 1f | signal f9e0 | snr defa | ber 00000e78 | unc 00000000 | FE_HAS_LOCK status 1f | signal fc20 | snr dc38 | ber 00000c28 | unc 00000000 | FE_HAS_LOCK status 1f | signal fb90 | snr e0a0 | ber 000010a8 | unc 00000000 | FE_HAS_LOCK status 1f | signal fc30 | snr dcc4 | ber 000006b8 | unc 00000000 | FE_HAS_LOCK Notice the 1st two lines of status 00. Obviously, this is where the errors are occuring. I am going to pull the board from this machine and test it in the machine I tested the FusionHDTV cards in. (not tonight) Maybe this will be a different story. Thanks, Michael Krufky
