Henrik Sjoberg wrote:
>>Philip Prindeville wrote:
>>
>>
>>>Manu Abraham wrote:
>>>
>>>
>>>>Henrik Sjoberg wrote:
>>>>
>>>>
>>>>>Hi,
>>>>>
>>>>>This is a bit embarrassing, but my latest patch contained pmt test
>>>>>code,
>>>>>which caused it not to work. I have prepared another one (third one's
>>>>>a
>>>>>charm?) which I have actually tested against cvs dvb-apps. It works
>>>>>ok for
>>>>>me.
>>>>>
>>>>>
>>>>>
>>>>
>>>>Any comments on this patch ? If none i can check it in.
>>>>
>>>>
>>>>Manu
>>>
>>>
>>>
>>>Yeah, minor comments... Should use space after keywords like "if"
>>>and "for".
>>>
>>
>>Yeah, these should be fixed .. Henrik .. ?
>
>
> Sure, no problem. However, a few questions on some of the comments.
>
>
>>>General comment about the code is that there are a lot of "magic
>>>numbers"
>>>that aren't evident to the casual reader:
>>>
>>>+ if(p_descriptor->descriptor_tag != 0x09) {
>>>+ printf("ERROR::Trying to copy a CA descriptor with
>>>incorrect tag [%d]. Bailing out.\n",
>>>+ p_descriptor->descriptor_tag);
>>>+ return 16;
>>>+ }
>>>
>>>It's not clear what 0x09 signifies here... This should be either a
>>>"const unsigned"
>>>or else a #define... Ditto for the 16...
>>>
>>
>>These descriptors are defined in ISO13818 and other relevant documents..
>>Maybe we need to #define the descriptors...., but the descriptors are
>>quite a lot to be defined thus.,
>
>
> As Manu sais, there are lots of descriptors to be defined, especially in
> descriptor.c. I _could_ change them all, however, I _could_ use the time
> to improve other areas instead...
>
>
>>>There are no other printf()'s in this library... And errors should
>>>usually
>>>go to STDERR anyway... But in general, a library should return error
>>>status but not print messages. Let the application decide if it wants
>>>to
>>>generate a message or not.
>>>
>>
>>Hmm... i think that was for debugging, Anyway you are right. But the
>>problem here is if we don't see the error's/messages it would be quite
>>difficult to debug the lib ..
>
>
> As this is how the error messages of most of dvb-apps are used, I think we
> should agree on a good solution on this and do a larger improvement of it
> in all libs in dvb-apps.
>
>
>>>More comments...
>>>
>>>+static void try_move_ca_descriptors(struct service_info *p_si)
>>>+{
>>>+ int i;
>>>+ int j;
>>>+ int k;
>>>+ int l;
>>>+ struct streams *p_stream1;
>>>+ struct streams *p_stream2;
>>>+ struct descriptor *p_desc1;
>>>+ struct descriptor *p_desc2;
>>>+ int movable = 1;
>>>+ int ca_descriptors = 0;
>>>+ int num_ca1;
>>>+ int num_ca2;
>>>+ int found_match;
>>>+ int found;
>>>
>>>Use commas and group variables of identical types.
>>>
>>
>>Yeah ..
>
>
> I'm on it.
>
>
>>>Do we need:
>>>
>>>+ //int j, k, l, i2, j2;
>>>
>>>In:
>>>
>>> printf("%s: Setting PMT Command\n", __FUNCTION__);
>>>- for (i = 0; i < p_en50221_pmt_object->program_desc_count; i++) {
>>>- if
>>>(p_en50221_pmt_object->p_en50221_prog_desc[i].descriptor_tag
>>>== 0x09) {
>>>- printf("%s: CA descriptor found @ PROGRAM
>>>Level, Setting CA PMT command=[%02x]\n", __FUNCTION__, pmt_command);
>>>+ if (p_en50221_pmt_object->program_desc_count > 0) {
>>>+ printf("%s: CA descriptor(s) found @ PROGRAM Level,
>>>Setting CA PMT command=[%02x]\n",
>>>+ __FUNCTION__, pmt_command);
>>> p_en50221_pmt_object->ca_pmt_cmd_id =
>>>pmt_command;
>>> object_length += 8;
>>> }
>>>- }
>>>
>>>
>>>If you're changing the level of nesting, then the indent should change
>>>as well...
>>>
>>
>>True...
>
>
> Dito.
>
>
>>>In:
>>>
>>>+ sprintf(message, "%s: %s={", __FUNCTION__, type);
>>>+
>>>+ sprintf(temp, "Length=%d", ptr[pos++]);
>>>+ strcat(message, temp);
>>>+ list_management = ptr[pos++];
>>>+ sprintf(temp, ":CA_PMT_ListManagement=%d", list_management);
>>>+ strcat(message, temp);
>>>+ sprintf(temp, ":ProgramNumber=0x%02x%02x=%d", ptr[pos + 0],
>>>+ ptr[pos + 1], (ptr[pos + 0] << 8) + ptr[pos + 1]);
>>>+ strcat(message, temp);
>>>+ pos += 2;
>>>+ sprintf(temp, ":VersionNumber=%d", (ptr[pos++] >> 1) & 0x1f);
>>>+ strcat(message, temp);
>>>+ program_info_length = ((ptr[pos + 0] << 8) & 0x0f) + ptr[pos +
>>>1];
>>>+ pos += 2;
>>>+ sprintf(temp, ":Program={");
>>>+ strcat(message, temp);
>>>
>>>
>>>I would set up a FILE * to point to the buffer, and therefore guard
>>>against overflowing the size of the buffer.
>>
>>
>> ???.
>>
>>
>>>Looking a little further,
>>>though, we see:
>>>
>>>+ sprintf(temp, "}\n");
>>>+ strcat(message, temp);
>>>+
>>>+ printf(message);
>>>+
>>>+ return 0;
>>>
>>>So I'm stumped... Why all of this trouble to build a buffer and then
>>>printf(), when it could be printf'd as you go?
>>>
>>
>>That message is then later on copied out, to create another message.
>>The printf's are temporarily for debugging at the moment.
>
>
> The reason is actually that I call parse_ca_descriptor while I construct
> the string. That function in turn does printouts, which would destroy my
> message if I would have printf:d it.
>
>
>>>Also, printf(message) is dangerous... What if "message" contains
>>>"%s"? Should be using fputs(message, STDOUT) instead... And
>>>that would avoid using:
>>>
>>>+ char message[2048];
>>>
>>>which is a lot of stack space.
>>
>>
>>You mean allocate in the heap.. ?
>>
>>
>>>Not sure why:
>>>
>>>uint16_t debug_parse_message(struct ca_msg *p_ca_msg, uint16_t length)
>>>
>>>needs a return value, if it's an invariant "0".
>
>
> It doesn't, I will remove it.
>
>
>>>Regarding changes like:
>>>
>>>+++ lib/libdvbsi/channels.c 18 Oct 2005 16:44:42 -0000
>>>@@ -102,7 +102,6 @@
>>>static int parse_param(char *val, const param *p_list, int list_size)
>>>{
>>> int i;
>>>-
>>> for (i = 0; i < list_size; i++) {
>>> if (strcasecmp(p_list[i].name, val) == 0)
>>> return p_list[i].value;
>>>
>>>Please avoid whitespace only changes. They make merging multiple
>>>branches hellish.
>
>
> Strange, I though diff -ub would ignore that. I'll keep it in mind though.
>
You need to do diff -ubB to get it ignore blank lines.
>
>>>Also, many people like a blank line between declarations and statements.
>>>
>>>Looking at:
>>>
>>>+ if (p_descriptor->extended_event.length_of_items)
>>>+ free(p_descriptor->extended_event.p_items);
>>>+ if (p_descriptor->extended_event.text_length)
>>>+ free(p_descriptor->extended_event.p_text_char);
>>>
>>>
>>>Don't bother. free(NULL) is perfectly fine. I would, on the
>>>other hand, always NULL out a pointer that I've freed, unless
>>>it is about to go out of scope. I.e.:
>>>
>>> free(p_description->extended_event.p_text_char);
>>> p_description->extended_event.p_text_char = NULL;
>>>
>>>and thus avoid memory leaks or double-frees. Same elsewhere.
>
>
> This is mainly in descriptor.c, which is not a rewrite, but a
> restructuring. However, I could put in some work here too.
> The entire memory handling would actually benefit from a review.
>
>
>>>In:
>>>
>>>+ p_descriptor->short_event.iso_639_language_code =
>>>+ (((buf[pos] << 8) | buf[pos + 1]) << 8) | buf[pos + 2];
>>>
>>>
>>>Not sure I get this... Shouldn't "pos" be shifted more bits?
>>>Otherwise,
>>>"pos" and "pos + 1" will be combined... Oh, got it. Didn't match
>>>parens.
>>>Well, I'd still write:
>>>
>>> (buf[pos] << 16) | (buf[pos + 1] << 8) | buf[pos + 2];
>>>
>>>instead...
>
>
> I would too ;) Also in descriptor.c. I wanted to change as few things as
> possible when I had no chance of testing it.
>
>
>>>Regarding:
>>>
>>>+ struct descriptor *p_en50221_streams_desc =
>>>+ (struct descriptor *) malloc(sizeof (struct
>>>descriptor) * p_streams->streams_desc_count);
>>>
>>>malloc() returns a "void *", which is an untyped pointer. It doesn't
>>>need
>>>to be cast. Also:
>>>
>>
>>Right.
>>
>>
>>> p = malloc(sizeof(*p));
>>>
>>>is a lot more clear than:
>>>
>>> p = malloc(sizeof(struct descriptor))
>>>
>>>since you don't have to flip back and confirm that "p" is of type
>>>"struct descriptor". Same applies whether you are allocating a
>>>single element or an array of them.
>>
>>
>>
>>This is not quite right. On LKML, this has been proven not advisable.
>>You can see a lengthy discussion of this on LKML with a thread like this
>>
>>http://marc.theaimsgroup.com/?t=112703827100001&r=1&w=2
>>
>>You can see a lot of comments on the same.
>>
>>
>>Manu
>>
>
>
> I'll give the code a few hours this weekend and try to do an overall
> improvement regarding things mentioned above.
>
> Thanks for the comments Philip.
>
> Regards,
> Henrik
>
>
>
> _______________________________________________
>
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
