That didn't lock up, so yes, the order does matter. However, the analog still doesn't work. Just a thought-- perhaps the HDTV5 lite needs to be bttv0 for the analog to work since /dev/video0 and /dev/vbi0 is assigned to the lite even when it's the 2nd card, since the DST has no analog. Next I tried swapping the pci cards back where they were originally, but now I get a lockup no matter which card is specified first in the bttv line. I also tried specifying only one card at a time, but it still locks up when the DST is the 2nd pci card. It looks like the DST card has to be resolved before the lite card or there is a lockup. Any other ideas? Regards, Greg Manu Abraham <abraham.manu@xxxxxxxxx> wrote: GFarris wrote: > Thanks for the response. Unfortunately that didn't fix it. > > I tried both on the same line: > bttv card=0x71 i2c_hw=1 card=0x87 i2c_hw=0 > That locked up! > can you try bttv card=0x87 i2c_hw=0 card=0x71 i2c_hw=1 just try out to see whether the order does matter. Manu -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/linux-dvb/attachments/20051013/e646488c/attachment.htm
