GFarris wrote: > That didn't lock up, so yes, the order does matter. > However, the analog still doesn't work. > > Just a thought-- perhaps the HDTV5 lite needs to be bttv0 for the > analog to work since /dev/video0 and /dev/vbi0 is assigned to the lite > even when it's the 2nd card, since the DST has no analog. > I don't know about this aspect that the HDTV5 needs to be bttv0 to work. Mike can comment on this better. > Next I tried swapping the pci cards back where they were originally, > but now I get a lockup no matter which card is specified first in the > bttv line. I also tried specifying only one card at a time, but it > still locks up when the DST is the 2nd pci card. > If it is the 2nd card, you need to change the order in which card= option. > It looks like the DST card has to be resolved before the lite card or > there is a lockup. > The only concern with the DST is that it uses Hardware I2C. This has to be specified as a module parameter to bttv , else probably a lockup would happen. For bttv when card=0xYY is specified, the expected behaviour should be that only the card should be initialized. Maybe you can check whether that behaviour still remains the same. Manu
