Hi, the tuning problem is solved, now! Patrick Boetcher realized that the dvb-usb-wt220u-01.fw firmware file from http://www.linuxtv.org/downloads/firmware/ actually contained the dvb-usb-dtt200u-01.fw firmware. The Yakumo QuickStick requires the dvb-usb-wt220u-01.fw! The corresponding md5sums of the firmware files are here: d68d6ad6b6eebf7e4435935c1bbaf313 dvb-usb-dtt200u-01.fw 782c9937b3f42e5248584570857c8b7f dvb-usb-wt220u-01.fw So please check in case of problems. Until the archive is updated you can find the correct dvb-usb-wt220u-01.fw firmware here: http://www.linuxtv.org/cgi-bin/viewcvs.cgi/*checkout*/dvb-kernel/firmware/dvb-usb-wt220u-01.fw?rev=1.1 Cheers, Frank Frank Breitling wrote: >Hi, > >sorry, I forgot to mention the verbose output: > >neo:~/tmp/dvb-apps/util/scan$ dvbscan -vvvvvvvvvvv dvb-t/de-Berlin >scanning dvb-t/de-Berlin >using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >initial transponder 522000000 0 2 9 1 1 2 0 >initial transponder 570000000 0 2 9 1 1 2 0 >initial transponder 618000000 0 1 9 1 1 2 0 >initial transponder 658000000 0 2 9 1 1 2 0 >initial transponder 778000000 0 2 9 1 1 2 0 > > >>>>tune to: >>>> >>>> >522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE > > >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>> >>>> >WARNING: >>> tuning failed!!! > > >>>>tune to: >>>> >>>> >522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >(tuning failed) > > >>>>tuning status == 0x20 >>>>tuning status == 0x20 >>>> >>>> >. >: > > >Frank > > > >Patrick Boettcher wrote: > > > >>Hi, >> >>On Wed, 28 Sep 2005, Frank Breitling wrote: >> >> >> >>>>Are you really sure about 177 MHz and not 177.5 MHz? >>>> >>>> >>>This frequency was just an example. I can not tune to any frequency, >>>e.g. "dvbtune -f 522000" gives the same output. >>> >>> >>Oh. I was able (and others too) to tune to UHF frequencies. >> >>I'm not familar with dvbtune, can you please try dvbscan from dvb-apps >>CVS for testing. >> >> >> >>>You would be very welcome to test the stick on my laptop, too. >>> >>> >>I'm a bit out of time at the moment, sorry. >> >> >> >>>To clearify, I compiled the driver as module. But if I understand you >>>correctly, this is not required for the Yakumo Quickstick. Is this >>>correct? >>> >>> >>Yes. I forgot to mention that in the last email. >> >>best regards, >>Patrick. >> >>-- >> Mail: patrick.boettcher@xxxxxxx >> WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ >> >>_______________________________________________ >> >>linux-dvb@xxxxxxxxxxx >>http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> >> >> > > >_______________________________________________ > >linux-dvb@xxxxxxxxxxx >http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > >
