Hi, sorry, I forgot to mention the verbose output: neo:~/tmp/dvb-apps/util/scan$ dvbscan -vvvvvvvvvvv dvb-t/de-Berlin scanning dvb-t/de-Berlin using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 522000000 0 2 9 1 1 2 0 initial transponder 570000000 0 2 9 1 1 2 0 initial transponder 618000000 0 1 9 1 1 2 0 initial transponder 658000000 0 2 9 1 1 2 0 initial transponder 778000000 0 2 9 1 1 2 0 >>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 >>> tuning status == 0x20 WARNING: >>> tuning failed!!! >>> tune to: 522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) >>> tuning status == 0x20 >>> tuning status == 0x20 . : Frank Patrick Boettcher wrote: > Hi, > > On Wed, 28 Sep 2005, Frank Breitling wrote: > >>> Are you really sure about 177 MHz and not 177.5 MHz? >> >> >> This frequency was just an example. I can not tune to any frequency, >> e.g. "dvbtune -f 522000" gives the same output. > > > Oh. I was able (and others too) to tune to UHF frequencies. > > I'm not familar with dvbtune, can you please try dvbscan from dvb-apps > CVS for testing. > >> You would be very welcome to test the stick on my laptop, too. > > > I'm a bit out of time at the moment, sorry. > >> To clearify, I compiled the driver as module. But if I understand you >> correctly, this is not required for the Yakumo Quickstick. Is this >> correct? > > > Yes. I forgot to mention that in the last email. > > best regards, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >