[linux-dvb] Yakumo QuickStick frontend tuning problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Frank Breitling wrote:

>Patrick Boettcher wrote:
>
>  
>
>>On Sat, 24 Sep 2005, Frank Breitling wrote:
>>
>>    
>>
>>>Hello,
>>>
>>>I have been trying to get a Yakumo QuickStick DVB-T (USB 2.0) running
>>>with kernel 2.6.13.2. First I plugged in the stick and as the syslog
>>>shows (attached below) the stick is recognized although "recv bulk
>>>message failed: -110". Then I tried:
>>>host:~$ dvbtune -f 1770000
>>>      
>>>
>>Are you really sure about 177 MHz and not 177.5 MHz?
>>    
>>
>
>This frequency was just an example. I can not tune to any frequency,
>e.g. "dvbtune -f 522000" gives the same output.
>
>  
>

don't forget to set the bandwidth with -bw and to use cvs

 

 

 --

 Email.it, the professional e-mail, gratis per te: http://www.email.it/f

 

 Sponsor:

  Vuoi bere tanta acqua pura e risparmiare ben 495 euro all'anno?

* Con BeviSano avrai finito di comprare acqua in bottiglia - clicca qui 

 Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3628&d=28-9


[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux