Am Fri, 23 Sep 2005 17:54:42 +0200 (MEST) schrieb wolfgang pauli <ookami@xxxxxx>: > Hi, > I got this stupid card today and it does not find any channels. I am > using "modprobe saa7134 card=26 tuner=33" and get this dmesg output > saa7130/34: v4l2 driver version 0.2.12 loaded > ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 201 > saa7134[0]: found at 0000:01:07.0, rev: 1, irq: 201, latency: 32, mmio: > 0xd8001000 > saa7134[0]: subsystem: 11bd:002d, board: Pinnacle PCTV Stereo (saa7134) > [card=26,insmod option] > saa7134[0]: board init: gpio is c806000 > tuner: chip found at addr 0xc0 i2c-bus saa7134[0] > tuner: type set to 33 (MT20xx universal) by saa7134[0] > tuner: microtune: companycode=3cbf part=42 rev=8f > tuner: microtune MT2050 found, OK > tda9885/6/7: chip found @ 0x86 > saa7134[0]: i2c eeprom 00: bd 11 2d 00 f8 f8 1c 00 43 43 a9 1c 55 d2 b2 > 92 > saa7134[0]: i2c eeprom 10: 00 f0 04 04 ff 20 ff ff ff ff ff ff ff ff ff > ff > saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 03 01 08 ff 00 25 ff ff ff > ff > saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ff > saa7134[0]: registered device video0 [v4l2] > saa7134[0]: registered device vbi0 > Seems OK to me. But it does not find any channels. It can not be the > antenna, because it was working with the old card. I saw 100s of msgs > about this problem, but none helped me or was solved. ANy suggestions? > Thank you!!! > Oups. I did not realize that you want to recive analog channels as I did not expect a question about analog video in a dvb mailing list. If you use modprobe the card would be auto detected, so you do not need to select a card type. The gentoo-wiki entry explains how you can use the card with dvb-t. I never tried to use the card with analog channels. Regards, Tim -- Erstellt mit Operas revolution?rem E-Mail-Modul: http://www.opera.com/m2/
