Sid Boyce wrote: > Mark Weaver wrote: > >>> The card appears to tune fine with tzap, although I never get any data >>> from it: >>> >>> cx88[0]/2: cx8802_timeout >>> cx88[0]/2: cx8802_stop_dma >>> cx88[0]/2: restarting queue >>> cx88[0]/2: cx8802_restart_queue >>> cx88[0]/2: cx8802_restart_queue: queue is empty >>> cx88[0]/2: queue is empty - first active >>> cx88[0]/2: cx8802_start_dma w: 0, h: 0, f: 2 >>> cx88[0]/2: setting the interrupt mask >>> cx88[0]/2: [f653cdc0/0] cx8802_buf_queue - first active >>> >>> is repeated over and over in the logs. >>> >> I've moved up from 2.6.12->2.6.13 and that seems to have fixed the >> issue. >> > > I must boot 2.6.13/2.6.14-rc2 and check, but I'm having the same > errors at 2.6.14-rc1-git4. > Regards > Sid. I get the same messages (these are not errors) under 2.6.13.y ... I havent tested 2.6.14-rcX with my cx88 boards yet, but I am sure they will still be there. I would assume that most likely, Make Weaver's missing data problem must have been fixed by some update to the frontend driver used by his board during 2.6.13-rcX development.
