-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mark Weaver wrote: > >> Are you doing tzap CHAN_XX -r ? >> >> -r is the key. > > I wasn't, but it doesn't seem to make any difference -- it still gets a > lock fine, but there's no data from the card (dvbstream/mplayer/scan). > It also doesn't get a lock if I ask it to tune to some made up > frequency, so it seems that the tuner is working ok. > >> >>> cx88[0]/2: cx8802_timeout >>> cx88[0]/2: cx8802_stop_dma >>> cx88[0]/2: restarting queue >>> cx88[0]/2: cx8802_restart_queue >>> cx88[0]/2: cx8802_restart_queue: queue is empty >>> cx88[0]/2: queue is empty - first active >>> cx88[0]/2: cx8802_start_dma w: 0, h: 0, f: 2 >>> cx88[0]/2: setting the interrupt mask >>> cx88[0]/2: [f653cdc0/0] cx8802_buf_queue - first active >>> >>> is repeated over and over in the logs. >>> >>> I've had a bit of a poke around, but I'm at a loss as to what to try >>> next. >> >> >> >> I get the same messages with my cx88 boards. They annoy me, but I >> never really cared. There's probably some verbosity default setting >> set too high. Does anybody know if these messages are important enough >> to keep visible by default? >> > This looks to me like it is restarting the RISC program on the DMA > controller after not seeing any data for 0.5s, so I don't think it > should happen under normal circumstances. > > Thanks, > > Mark > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > I get the same dmesg's all the time and my card works fine. I had a problem with my nova-t card where when the frontend device was closed it would quickly lose its lock, so this would work: dvbtune -f ... && dvbdate but this would not: dvbtune -f ... dvbdate does the "-i" flag work on dvbtune? does dvbstream work when you use "-f" to tune it? when I put mythtv on my box, it keeps the frontend open so data is always available (though I have to use mythtv to change MUX rather than dvbtune) - -- Simon Kilvington -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFDM8LWmt9ZifioJSwRAmQWAJ0TkBpmnNdvjDEXN0GBsIBOELb4aACeM2UY V5tZXh/5vyDt1IqTNJSq+us= =/wt4 -----END PGP SIGNATURE-----
