Manu Abraham wrote: > Per Dal?n wrote: > >> I have now tested my Twinhan DTV Cab-CI with MythTV (latest from cvs) >> and the dvb driver that I described in my earlier mail. >> No success! >> >> My question is: >> Have anybody been able to run with Twinhan DTV Cab-CI card? >> >> >> > I think people have reported it to be working. > from the CVS ... > > Fix BUG in DVB-C frequency setting > - Result was DVB-C cards failed to tune > > Fix sent in by Peng Cao <caopeng75@xxxxxxxxx <mailto:caopeng75@xxxxxxxxx>> > > > was a showstopper for DVB-C cards. > >> I have searched the list and cannot find anyone that seems to got the >> Twinhan DTV Cab-CI to work. >> Is this wrong? >> >> It seems that people has succeded with Twinhan DTV Sat-CI and Twinhan >> DTV Ter-CI, but not the Twinhan DTV Cab-CI. >> >> Do anyone have any good idea how I should get it to work? >> I'm willing to test new patches, make tracelogs, etc... >> >> > > get latest dvb-kernel CVS, compile with 2.6.13, > do a modprobe dst verbose=5 > > or get 2.6.14-rc1 or newer > compile and install it, > do a modprobe dst verbose=5 > > and please do send in the logs > > Manu > > Ok, thanks for looking into my problems, Manu. I did some test with 2.6.14-rc1 (no patches and no dvb from cvs). I got the same (bad) results (as far as I understand) as with my earlier tests. I have described below how I tested and the dmesg from my tests. Have I forgotten anything? Do You miss any important log or trace from me? # modprobe bttv i2c_hw=1 card=0x71 # modprobe dst verbose=5 # modprobe dvb-bt8xx dmesg: ------------------------------------ ... Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:00:06.0, irq: 11, latency: 32, mmio: 0xef000000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00fb00fd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:06.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 bt878(0): Bt878 (rev 17) at 00:06.1, irq: 11, latency: 32, memory: 0xee800000 DVB: registering new adapter (bttv0). rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x44 0x43 0x54 0x2d 0x43 0x49 0x6c dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_get_device_id: Recognise [DCT-CI] dst_type_print: DST type: cable DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 firmware version = 2 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 0a 00 00 00 00 00 f6 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 0 read_dst: reply is 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 dst_get_mac: MAC Address=[00:00:00:00:00:00] dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-C)... ------------------------------------ I use the channel DisMix besauce it is not a scrambled channel. # ./dvb-apps/util/szap/czap -c mychannels.conf -n 7 -r using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file 'mychannels.conf' 7 DisMix:322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4100:4356:1016 7 DisMix: f 322000000, s 6875000, i 2, fec 0, qam 3, v 0x1004, a 0x1104 status 00 | signal 0000 | snr 0000 | ber 00000004 | unc 00000000 | status 1f | signal 8000 | snr 1400 | ber 00000004 | unc 00000000 | FE_HAS_LOCK status 1f | signal 8000 | snr 1400 | ber 00000004 | unc 00000000 | FE_HAS_LOCK status 1f | signal 8000 | snr 1400 | ber 00000004 | unc 00000000 | FE_HAS_LOCK dmesg: ------------------------------------ ... DVB: registering frontend 0 (DST DVB-C)... rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 06 00 00 00 00 00 fa ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 1 read_dst: reply is 0x0 0x44 0x43 0x54 0x2d 0x43 0x49 0x6c dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_get_device_id: Recognise [DCT-CI] dst_type_print: DST type: cable DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 firmware version = 2 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 0a 00 00 00 00 00 f6 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 0 read_dst: reply is 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 dst_get_mac: MAC Address=[00:00:00:00:00:00] dst_ca_attach: registering DST-CA device DVB: registering frontend 0 (DST DVB-C)... dst_set_freq: set Frequency 322000000 dst_set_frontend: Set Frequency=[322000000] dst_set_symbolrate: set symrate 6875000 dst_write_tuna: type_flags 0x1b dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 09 00 04 e9 d0 00 1a db 40 05 ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x9 0x0 0x4 0xe9 0xd0 0x0 0x1a 0xdb 0x40 0x5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x14 0x80 0x5c 0x0 0xb dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x14 0x80 0x5c 0x0 0xb dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x14 0x80 0x5c 0x0 0xb dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x14 0x80 0x5c 0x0 0xb ------------------------------------ # cat /dev/dvb/adapter0/dvr0 > test02.ts (^C) # cat /dev/dvb/adapter0/dvr0 > test03.ts (^C) The files test02.ts and test03.ts can be found here: http://gd-willy.kicks-ass.org/per/dvb-tests/ dmesg: ------------------------------------ ... dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x5a 0x80 0x5c 0x0 0xc5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x5a 0x80 0x5b 0x0 0xc6 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x5a 0x80 0x5c 0x0 0xc5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x5a 0x80 0x5c 0x0 0xc5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: reply is 0x0 0x5 0x0 0x5a 0x80 0x5c 0x0 0xc5 dst_comm_init: Initializing DST. dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] rdc_reset_state: Resetting state machine dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000] dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002] writing [ 00 05 00 00 00 00 00 fb ] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] read_dst: reply is 0xff dst_wait_dst_ready: dst wait ready after 2 read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to return from previous errors. dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] read_dst: read_dst error (err == -5, len == 0x08, b0 == 0x00) dst_error_recovery: Trying to return from previous errors. dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] read_dst: RDC 8820 RESET dst_error_bailout: Trying to bailout from previous error. rdc_8820_reset: Resetting DST dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000] dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004] dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_command: Trying to recover.. dst_error_recovery: Trying to return from previous errors. dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000] dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000] ------------------------------------ thanks Per
