Henrik Sj?berg wrote: > You are probably seeing the NEWTUNE/TS204 bug. Lee Hammerton posted a fix on > this in early September. Try that. > It works fine for me with 2.6.13.1 and latest dvb-kernel. > > Regards, > Henrik No, i do not think so. I have applied the NEWTUNE/TS204 bugfix patch (dst_tuner_fix.patch) + a fix for "FE_GET_FRONTEND returns wrong frequency for TwinHan DST cards" (dst-getfreq.patch). I might do someting eles wrong, so here is some information about my Twinhan card and how I have tested it. Here is what I get from dmesg: ------------------------------ bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 bttv0: Bt878 (rev 17) at 0000:00:06.0, irq: 11, latency: 32, mmio: 0xef000000 bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00f100fd [init] bttv0: using tuner=4 bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:00:06.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 bt878(0): Bt878 (rev 17) at 00:06.1, irq: 11, latency: 32, memory: 0xee800000 DVB: registering new adapter (bttv0). dst_get_device_id: Recognise [DCT-CI] DST type flags : 0x1 newtuner 0x2 ts204 0x8 firmware version = 1 0x10 firmware version = 2 dst_get_mac: MAC Address=[00:00:00:00:00:00] dst_ca_attach:registering DST-CA device DVB: registering frontend 0 (DST DVB-C)... ------------------------------ root@darkstar:~# ./dvb-apps/util/szap/czap -c mychannels.conf DisMix -r using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file 'mychannels.conf' 1 DisMix:322000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4100:4356:1016 1 DisMix: f 322000000, s 6875000, i 2, fec 0, qam 3, v 0x1004, a 0x1104 status 00 | signal 0000 | snr 0000 | ber 00000004 | unc 00000000 | status 1f | signal 8000 | snr 5a00 | ber 00000004 | unc 00000000 | FE_HAS_LOCK status 1f | signal 8000 | snr 5a00 | ber 00000004 | unc 00000000 | FE_HAS_LOCK status 1f | signal 8000 | snr 5a00 | ber 00000004 | unc 00000000 | FE_HAS_LOCK ... root@darkstar:~# cat /dev/dvb/adapter0/dvr0 > test.ts test.ts can be found here: http://www.cnwconsulting.se/users/per.dalen/test.ts Thanks Per > > -----Original Message----- > From: linux-dvb-bounces@xxxxxxxxxxx > [mailto:linux-dvb-bounces@xxxxxxxxxxx]On Behalf Of Per Dal?n > Sent: Monday, September 19, 2005 9:37 AM > To: linux-dvb@xxxxxxxxxxx > Subject: Re: [linux-dvb] Twinhan DTV Cab-CI support? > > > >>Hi all! >> >>Can someone tell me the status of the support for Twinhan DTV Cab-CI, >>and the quality of the card? >>Thanks, >> >>/Anders > > > I have been able to scan and tune channels with a CVS dvb-kernel + 2 > patches found on the list (dst-getfreq.patch and dst_tuner_fix.patch). > > The output from /dev/dvb/adapter0/dvr0 looks strange, but I do know if I > doing somthing wrong or there is a real problem. > > I use a vanilla 2.6.13 kernel. > > /Per > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >
