On Sat, 10 Sep 2005, Michal Semler wrote: > Dne st 7. z?Y? 2005 11:07 jste napsal(a): >> On Wed, 7 Sep 2005, Michal Semler wrote: >>> Hi, >>> >>> I am sure it is correct. It is taken from kaffeine config file and works >>> with my desktop card. >>> >>>> T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO >> >> *Please* give it a try anyway. > > echo "T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO" > init > > scan init >> .mplayer/channels.conf > scanning init > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > initial transponder 674000000 0 9 9 6 2 4 4 >>>> tune to: > 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO > WARNING: filter timeout pid 0x0011 > WARNING: filter timeout pid 0x0000 > WARNING: filter timeout pid 0x0010 > dumping lists (0 services) > Done. > > Not working :( But there is a lock, otherwise you wouldn't get the timeouts, but a "tuning failed". Can you try the frequency in Windows with the antenna in the same position? When you find a working position, reboot to Linux and try again the line above. HTH, Patrick. -- Mail: patrick.boettcher@xxxxxxx WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
