Dne st 7. z??? 2005 11:14 Michal Semler napsal(a): > Dne st 7. z??? 2005 11:07 jste napsal(a): > > On Wed, 7 Sep 2005, Michal Semler wrote: > > > Hi, > > > > > > I am sure it is correct. It is taken from kaffeine config file and > > > works with my desktop card. > > > > > >> T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO > > > > *Please* give it a try anyway. > > OK I will > > > Hmm, do you have any higher frequency than 674 MHZ which is working in > > Linux? scan init >> .mplayer/channels.conf scanning init using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 818000000 0 9 9 6 2 4 4 >>> tune to: 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO 0x0000 0x0001: pmt_pid 0x0000 CTc -- - CT1 (running) 0x0000 0x0002: pmt_pid 0x0000 CTc -- - CT2 (running) 0x0000 0x000b: pmt_pid 0x0000 CTc -- - CRo 1 Radiozurnal (running) 0x0000 0x000c: pmt_pid 0x0000 CTc -- - CRo 2 Praha (running) 0x0000 0x000d: pmt_pid 0x0000 CTc -- - CRo 3 Vltava (running) 0x0000 0x000e: pmt_pid 0x0000 CTc -- - CRo Regina (running) 0x0000 0x0010: pmt_pid 0x0000 CTc -- - Country (running) 0x0000 0x0011: pmt_pid 0x0000 CTc -- - Expres (running) Network Name 'Cesky Telecom' >>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE WARNING: >>> tuning failed!!! >>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed) WARNING: >>> tuning failed!!! >>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE Network Name 'Cesky Telecom' 0x0000 0x0001: pmt_pid 0x0100 CRa -- CT2. (running) 0x0000 0x0002: pmt_pid 0x0101 CRa -- Nova. (running) 0x0000 0x0003: pmt_pid 0x0102 CRa -- CT1. (running) 0x0000 0x0004: pmt_pid 0x0105 CRa -- Prima. (running) 0x0000 0x0005: pmt_pid 0x0107 CRa -- Ocko. (running) 0x0000 0x0006: pmt_pid 0x0104 CRa -- Radiozurnal. (running) 0x0000 0x0007: pmt_pid 0x0106 CRa -- Praha. (running) 0x0000 0x0008: pmt_pid 0x0103 CRa -- Vltava. (running) 0x0000 0x000a: pmt_pid 0x010a CRa -- Frekvence1. (running) dumping lists (17 services) Do you see? Higher 818 works... Michal > > # DVB-T Praha (Prague, Czech Republic) > # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy > T 506000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE > T 674000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE > T 818000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE > > > This is a list which I am able to tune in windows and also in my second > card. I am not sure for now if I was able to tune 818 frequency with pluto, > because it is not important for me. It is only testing for now. > > Michal > > > Patrick. > > > > -- > > Mail: patrick.boettcher@xxxxxxx > > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ -- S pozdravem Michal Semler
