Dne so 10. z??? 2005 14:03 jste napsal(a): > On Sat, 10 Sep 2005, Michal Semler wrote: > > Dne st 7. z?Y? 2005 11:07 jste napsal(a): > >> On Wed, 7 Sep 2005, Michal Semler wrote: > >>> Hi, > >>> > >>> I am sure it is correct. It is taken from kaffeine config file and > >>> works with my desktop card. > >>> > >>>> T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO > >> > >> *Please* give it a try anyway. > > > > echo "T 674000000 8MHz AUTO AUTO AUTO AUTO AUTO AUTO" > init > > > > scan init >> .mplayer/channels.conf > > scanning init > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > initial transponder 674000000 0 9 9 6 2 4 4 > > > >>>> tune to: > > > > 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_AUTO:FEC_AUTO:QAM_AUTO:TRANS > >MISSION_MODE_AUTO:GUARD_INTERVAL_AUTO:HIERARCHY_AUTO WARNING: filter > > timeout pid 0x0011 > > WARNING: filter timeout pid 0x0000 > > WARNING: filter timeout pid 0x0010 > > dumping lists (0 services) > > Done. > > > > Not working :( > > But there is a lock, otherwise you wouldn't get the timeouts, but a > "tuning failed". Can you try the frequency in Windows with the antenna in > the same position? When you find a working position, reboot to Linux and > try again the line above. Hi, I am using antenna build in my house (group antenna for all flats). In windows it works like a charm, but linux says this. There are no errors in picture in windows and in windows value of uncorrected bits is still 0 Michal > > HTH, > Patrick. > > -- > Mail: patrick.boettcher@xxxxxxx > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ -- S pozdravem Michal Semler
