[linux-dvb] pinnacle sat's success

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> bttv: driver version 0.9.15 loaded
> bttv: using 8 buffers with 2080k (520 pages) each for
> capture
> bttv: Bt8xx card found (0).
> ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level,
> low) -> IRQ 177
> bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 177,
> latency: 64, mmio: 0xf7c00000
> bttv0: detected: Pinnacle PCTV Sat [card=94], PCI
> subsystem ID is 11bd:001c
> bttv0: using: Nebula Electronics DigiTV
> [card=104,insmod option]
> bttv0: gpio: en=00000000, out=00000000 in=009f00fc
> [init]
> bttv0: using tuner=-1
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: PLL: 28636363 => 35468950 . ok
> bttv0: add subdevice "dvb0"
> bt878: AUDIO driver version 0.0.0 loaded
> bt878: Bt878 AUDIO function found (0).
> ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 19 (level,
> low) -> IRQ 177
> bt878(0): Bt878 (rev 17) at 02:07.1, irq: 177,
> latency: 64, memory: 0xf7d00000
> dvb_bt8xx: Unknown parameter `debug:Turn'
> DVB: registering new adapter (bttv0).
> xxx attach
> DVB: registering frontend 0 (Conexant CX24110 with
> CX24108 tuner, aka HM1221/HM1811)...
> even if I declare that my dvb-s pinnacle card is a
> Nebula (I think
> that Nebula is similar to Pinnacle)

Here it looks similar.
but why:  'bttv0: using: Nebula Electronics DigiTV' - second card?
hmm: dvb_bt8xx: Unknown parameter `debug:Turn'
do not have this one: ...aka HM1221/HM1811
> Therefore so I can proceed without fears that my
> system is  going down
> (the card is caught fire)
Why should it do this?

Do not 'Hotplug' the sat cable.

my dmesg output:
--------
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> 
IRQ 10
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 32, mmio: 0xdddfe000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=009f00fd [init]
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "dvb0"
bttv: Bt8xx card found (1).
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
bttv1: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xdddfc000
bttv1: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv1: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=009f00fc [init]
bttv1: using tuner=-1
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 . ok
bttv1: add subdevice "dvb1"
bt878: DVB driver version 0.0.1 loaded
bt878(0): DVB interface found.
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> 
IRQ 10
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 10, latency: 32, memory: 0xdddff000
bt878(1): DVB interface found.
ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> 
IRQ 11
bt878(1): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 32, memory: 0xdddfd000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (Conexant CX24110 DVB-S)...
DVB: registering new adapter (bttv1).
DVB: registering frontend 1 (Conexant CX24110 DVB-S)...
--------

Lukas
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.linuxtv.org/pipermail/linux-dvb/attachments/20050908/ae9857df/attachment.pgp

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux