why you have this dmesg ? for Lukas Kasprowicz and everyone who is interestend to the discussion my dmesg output: -------- bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 10, latency: 32, mmio: 0xdddfe000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,autodetected] bttv0: gpio: en=00000000, out=00000000 in=009f00fd [init] bttv0: using tuner=-1 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 . ok bttv0: add subdevice "dvb0" bttv: Bt8xx card found (1). ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 bttv1: Bt878 (rev 17) at 0000:00:0c.0, irq: 11, latency: 32, mmio: 0xdddfc000 bttv1: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv1: using: Pinnacle PCTV Sat [card=94,autodetected] bttv1: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv1: using tuner=-1 bttv1: registered device video1 bttv1: registered device vbi1 bttv1: PLL: 28636363 => 35468950 . ok bttv1: add subdevice "dvb1" bt878: DVB driver version 0.0.1 loaded bt878(0): DVB interface found. ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 10, latency: 32, memory: 0xdddff000 bt878(1): DVB interface found. ACPI: PCI Interrupt 0000:00:0c.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 bt878(1): Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 32, memory: 0xdddfd000 DVB: registering new adapter (bttv0). DVB: registering frontend 0 (Conexant CX24110 DVB-S)... DVB: registering new adapter (bttv1). DVB: registering frontend 1 (Conexant CX24110 DVB-S)... -------- do you have use the same modules which I loaded? your system see two different dvb-s card for your pinnacle card while my system see a dvb-s and a dvb-t card What's your kernel? What's the release of your dvb driver? If i don't excute modprobe bttv i2c_hw=1 card=0x68 the system see my pinnacle card as an analog device (in fact if I execute modprobe bttv or # modprobe bttv i2c_hw=1 card=0x5E # modprobe dvb-bt8xx # modprobe cx24110 ----------- and dmesg show me ------------ Linux video capture interface: v1.00 [drm] Loading R200 Microcode v4l2_common: unsupported module, tainting kernel. video_buf: unsupported module, tainting kernel. bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 177 bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 177, latency: 64, mmio: 0xf7c00000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,insmod option] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv0: using tuner=-1 bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI interrupt 0000:02:07.1[A] -> GSI 19 (level, low) -> IRQ 177 bt878(0): Bt878 (rev 17) at 02:07.1, irq: 177, latency: 64, memory: 0xf7d00000 Thanks a lot ___________________________________ Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB http://mail.yahoo.it
