Le Dimanche, 28 Ao?t 2005 15:08, Bernd Butscheidt a ?crit?: > Hello there, > > has anyone of you this card running? Yes. > Could you be so kind to tell me the exact list of kernel-modules it needs? > > I only found these ones: > > > bash-2.05b$ lsmod > Module Size Used by > budget_av 13696 0 > saa7146_vv 45888 1 budget_av > video_buf 17540 1 saa7146_vv > budget_core 7364 1 budget_av > saa7146 14984 3 budget_av,saa7146_vv,budget_core > ttpci_eeprom 2304 1 budget_core > tda10021 6020 1 budget_av > tda1004x 14340 1 budget_av I didn't compile these things as modules so I can't list them, but I guess you're lacking the "budget" module and maybe also the budget_ci module. I have all three selected (budget, _ci, _av) because I didn't know exactly what was needed. Selecting the budget module will also automatically include the correct tuner module which will appear as not selectable but will actually be compiled. > They are loading without errors using kernel 2.6.12.5. Still I'm using 2.6.12. At my first attempt, I only selected budget_ci and had the same behavior. You can check if your card is correctly detected with "dmesg". Mine reads this : --- saa7146: register extension 'budget dvb'. saa7146: register extension 'budget dvb /w video in'. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 saa7146: found saa7146 @ mem d8810000 (revision 1, irq 12) (0x153b,0x1156). DVB: registering new adapter (Terratec Cinergy 1200 DVB-C). adapter failed MAC signature check encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff budget-av: ci interface initialised. KNC1-0: MAC addr = 00:0a:ac:01:b3:c8 DVB: registering frontend 0 (Philips TDA10021 DVB-C)... saa7146: register extension 'budget_ci dvb'. --- With your current configuration you probably only have the "saa7146" lines (or only one of them. Regards, Christian > bash-2.05b$ scan -a 1 de-Berlin > > gives this: > > scanning de-Berlin > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > main:1882: FATAL: failed to open '/dev/dvb/adapter1/frontend0': 19 No such > device > > Is there interaction with my first car, an Technisat Airstar2, which stills > runs fine? Or is it wrong to look at adapter1 for the second card? > > dmesg says only this to the new card (=Cinergy): > saa7146: register extension 'budget dvb /w video in'. > > Bernd
