Hi Bernd, try modinfo for your listed drivers. There must be an option to set cardnumber. Unfortunately, I have Cinergy 1400 DVB-T. good luck Markus Am Sonntag 28 August 2005 15:08 schrieb Bernd Butscheidt: > Hello there, > > has anyone of you this card running? > > Could you be so kind to tell me the exact list of kernel-modules it needs? > > I only found these ones: > > > bash-2.05b$ lsmod > Module Size Used by > budget_av 13696 0 > saa7146_vv 45888 1 budget_av > video_buf 17540 1 saa7146_vv > budget_core 7364 1 budget_av > saa7146 14984 3 budget_av,saa7146_vv,budget_core > ttpci_eeprom 2304 1 budget_core > tda10021 6020 1 budget_av > tda1004x 14340 1 budget_av > > > They are loading without errors using kernel 2.6.12.5. Still > > bash-2.05b$ scan -a 1 de-Berlin > > gives this: > > scanning de-Berlin > using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' > main:1882: FATAL: failed to open '/dev/dvb/adapter1/frontend0': 19 No such > device > > Is there interaction with my first car, an Technisat Airstar2, which stills > runs fine? Or is it wrong to look at adapter1 for the second card? > > dmesg says only this to the new card (=Cinergy): > saa7146: register extension 'budget dvb /w video in'. > > Bernd > > > > > > > ___________________________________________________________ > Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier > anmelden: http://mail.yahoo.de > > > _______________________________________________ > > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
