Le Samedi 27 Ao?t 2005 18:46, Markus O. Hahn a ?crit?: > Hi there, > I try to get my Terratec DVB-T 1400 card running on > gentoo linux. (linux-2.6.12) > > This device seems to be connexant ref. design card=19 > 0000:00:13.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev > 05) 0000:00:13.2 Multimedia controller: Conexant: Unknown device 8802 (rev > 05) > > If I start by hand with > modprobe cx88xx card=19 > modprobe cx8802 > modprobe cx88-dvb > > lsmod | grep dvb > cx88_dvb 7812 0 > or51132 10244 1 cx88_dvb > video_buf_dvb 6788 1 cx88_dvb > dvb_core 86120 1 video_buf_dvb > cx22702 6724 1 cx88_dvb > dvb_pll 4676 3 cx88_dvb,or51132,cx22702 > cx8802 10692 1 cx88_dvb > cx88xx 54496 2 cx88_dvb,cx8802 > video_buf 22212 4 cx88_dvb,video_buf_dvb,cx8802,cx88xx > mt352 6980 1 cx88_dvb > > ideo_buf_dvb 6788 1 cx88_dvb > dvb_core 86120 1 video_buf_dvb > video_buf 22212 4 cx88_dvb,video_buf_dvb,cx8802,cx88xx > videodev 9920 1 cx88xx > > > Now I am able to use dvbzap which calls up mplayer. > vdr is also running but I can`t use kvdr or kdetv! > > > Which driver provides /dev/video resp /dev/dvb/frontend0/video0? Only devices with onboard mpeg decoder provide video0, osd0, audio0 ... Yours is a so called "budget" one, like most devices nowadays. You need a software audio/video decoder. Give Kaffeine a try (See README.dvb and Handbook for details). > The general thing is I am confused about all these drivers. > Where can I get a overview about the architecture? > > thanx and regards > > markus -- Christophe Thommeret
